Owner manual

13
TAB 5TAB 4TAB 6TAB 8TAB 7English TAB 3TAB 2
USING THE ALARM AND SLEEP FEATURES
Setting up the alarm
You can choose how and when you want to wake up,
then turn on the alarm for use.
Choosing a radio station or CD for
wake-up
1. Turn on your Wave
®
music system and tune to the
radio station or play the CD track you want to hear
when you wake up.
2. Adjust the volume to the wake-up leve
l you want to
hear.
3.
Press and hold Wake To until you hear
a double beep. Your alarm is now set to
wake you to
your chosen radio station
or CD track.
3
1
2
Press and hold for
a few seconds
Note: Neither your computer nor any device connected to
AUX IN on your system can be selected as the wake up
sound source.
Setting the alarm time
1. Press Alarm Time to enter the alarm
time setup mode. The alarm time appears
in th
e center of the display and flashes in
the up
per right corner.
2.
Press Time – or Time + to set your
wake-up time.
3.
Press Alarm Time again. Your
alarm time is now set.
4. Press the Alarm On/Off
button to make
the alarm active.
Note: During setup, if more than 10 seconds elapses
between button presses, the Wave
®
music system will
automatically exit the alarm time setup mode.
To confirm your alarm settings
Press Alarm Time. Alarm Time and Wake To settings
will be displayed for 10 seconds.
FM radio alarm
Alarm time flashing
Preset number
Radio station frequency
Alarm time
Example: Alarm is set to play radio station Preset 4,
101.7 FM, at 6:00 A.M.
Using the alarm
Stopping a sounding alarm
Press On/Off (Stop Alarm) to stop a sound-
ing alarm and reset it for the next day.
To turn the alarm on or off
Press Alarm On/Off to turn the alarm on or
off. It’s on when the alarm time is displayed in
the u
pper right-hand corner. It’s off when the
alarm
time is not visible in the upper right-
hand corner of the display.
00_SoundLink_book.book Page 13 Tuesday, July 7, 2009 9:58 AM