Specifications

Wall
mounting
the
adapter
You
can mount the adapter on a
wall
(hardware not included).
See "Mounting
hardware
specifications"
for the correct hardware.
If
the mounting hardware instructions
differ from these instructions,
follow
the mounting hardware instructions.
There are
two
ways
to
mount the adapter:
•
Vertically; connector panel facing
left
• Horizontally;
connector panel facing up
To
mount
the
adapter
~
6% in. (159 mm)
__
center-to-center
1.
Drill
two holes
6%
in. (159 mm) center-to-center.
2.
Insert plastic
wall
anchors (if mounting
to
wallboard).
3.
Install
pan-head wood screws.
Note:
Leave the screw heads
%
in.
(6.35 mm) above
wall
surface.
4. Position adapter onto the screws.
Mounting hardware specifications
Wall
thickness
1
in.
(25.4 mm) or thicker
%
in.
(9.5 mm) or thicker
Drill
bit
Ys
in. (3.17 mm)
3
/
16
in.
(4.
76 mm)
Pan-head
wood
screws
#8x11.4
in.
(32
mm)
#8x11.4
in.
(32
mm)
(2)
Plastic
wall
anchors
(2)
Not used #6-8x1
in.
(25.4 mm)
10-
English