User manual

32 | EN
PRODUCT DETAILS
Appearance Activity System State
A small bar of lights on the
leftmost end of the light
bar blinks once (white/on
if there is no active call; o
if there is an active call).
The volume has been set
to its lowest level.
A small bar of lights on the
rightmost end of the light
bar blinks once (white/on
if there is no active call; o
if there is an active call).
The volume has been set
to its highest level.
A small section of lights in
the center of the light bar
is blinking white rapidly.
The VB1 is searching for a
Wi-Fi network.
A small section of lights
in the center of the light
bar pulses white once and
then fades o.
The VB1 has connected to
a Wi-Fi network.
This also means the VB1
has detected a new audio
source connected to the
host USB port or Audio In.
A small section of lights in
the center of the light bar
is solid red.
The VB1 is not functioning
properly due to a
firmware/software issue.
Please contact Bose
technical support.
A small section of lights in
the center of the light bar
are blinking amber.
The VB1 is not functioning
properly due to a
connection issue. Make
sure the VB1 is connected
to a network.
White lights move
repeatedly between the
right and left ends.
The VB1 is downloading
and installing a firmware
update. Do not disconnect
the VB1 from its power
outlet or network. When
the update is complete,
the light bar will stop
moving, and the VB1 will
play an audio tone.