Operation Manual

TAB 5TAB 4TAB 6TAB 8TAB 7English TAB 3TAB 2

CHANGING YOUR SYSTEM SETUP

Unify™ system overview

The intelligent integration system guides you through

the initial process of setting up and configuring your

system. It helps you to choose the right cables and

inputs, and to program the click pad remote to operate

your connected devices.

After completing the initial setup, you can use the Unify

system at any time to change your system setup and

configuration.

Using the Unify menu

To access the Unify system:

1. Press the Setup button (page 20) on the front of the

control console to display the Unify menu.

2. Use the navigation buttons on the remote to high-

light the function you want.

3. Press OK on the remote to activate the function.

4. When you are done, select “Exit Unify” at the

bottom of the menu.

Note: To exit the Unify menu at any time or cancel the

function you started to use, press the source select

button on the remote, or the Setup button on the

control console.

Unify system functions

Resume initial setup

This function is available only if the initial setup process

is not completed. Selecting this function returns you to

initial setup process at the last completed event.

Restart initial setup

This function is available only if the initial setup process

is not completed. Selecting this starts the initial setup

process from the beginning.

Language

This function allows you to change the language of the

on-screen information.

ADAPTiQ

Selecting ADAPTiQ runs the audio calibration process

that adjusts the system audio output for the best

performance in your room.

Play Bose

demonstration

Plays the Bose audio/video demonstration. After

completion you are returned to the Unify menu.

MOG.book Page 27 Monday, November 8, 2010 12:21 PM