Operation Manual

25
CHANGING SOURCE AND SYSTEM OPTIONS
TAB 5TAB 4TAB 6TAB 8TAB 7English TAB 3TAB 2
Program Language
Selects an alternate audio track, such as a Secondary
Audio Program (SAP), when it is available.
Track 1* ................ Selects track 1
Track 2 .................. Selects track 2
Both Tracks........... Selects tracks 1 and 2
Not Available......... Automatically selected when no alternate
track is available
Channel Number
Turns the channel number queue off or specifies the
maximum number of digits used for the source you
have selected. The size of the queue should be set to
hold the largest number used by the source.
2 digits .......Number sent after 2 digits entered (00 to 99)
3 digits*......Number sent after 3 digits entered (000 to 999)
4 digits .......Number sent after 4 digits entered (0000 to 9999)
Off..............Each digit sent immediately when selected
Control Frame Sounds
Provides audible feedback when you glide your thumb
along the click pad or select a highlighted function.
On*..................Sound accompanies the movement of your
thumb on the click pad
Off...................No click pad sounds
Video Settings
Provides video presets for normal and dark ambient
light conditions.
Normal* .......... Optimized for most lighting conditions
Dark Room ..... Optimized for especially dark lighting
conditions
Basic video adjustments
The bright and dark room video presets were optimized
at the factory. However, if you choose to make
adjustments:
1. While “Video Settings” is highlighted, press and
hold the OK button on the remote to access the
basic video adjustments for the preset.
Brightness, Contrast,
Color, and Tint .............. 0 to 100 (50* Bright), (50* Dark)
Video Sharpness .......... 0 to 3 (2*)
Monitor Backlight......... 0 to 10 (6* Bright), (3* Dark)
Color Temperature ....... 1* to 3
2. Use the up/down navigation buttons to select the
item. Use the left/right navigation buttons to adjust
the value.
3. Press OK to return to the OPTIONS menu.
*Factory setting
MOG.book Page 25 Monday, November 8, 2010 12:21 PM