Technical information

15
OPERATION
Tab 6, 14
English Tab 2, 10 Tab 3, 11 Tab4, 12 Tab 5, 13
Tab 8, 16Tab2, 7, 15
To begin pairing with a Bluetooth device
1. With the Bluetooth device and the
SoundLink
®
Mobile speaker II both turned
on, press and hold the Bluetooth button
on the speaker for three seconds to make
the speaker discoverable.
The Bluetooth
®
indicator on the
SoundLink
®
Mobile speaker II slowly fades
on and off approximately once every
second to show that the speaker is
discoverable.
2. Set your Bluetooth device to “discover”
the SoundLink
®
Mobile speaker II, then
locate the Bluetooth device list.
3. From the Bluetooth device list, select the
device named “Bose SoundLink.”
4. If your device asks for a passkey, enter
digits 0000 (four zeros) and press OK.
Some devices may also ask you to accept
the connection.
Your Bluetooth device indicates when pairing
is complete. The SoundLink
®
Mobile speaker II
indicates pairing is complete when the
Bluetooth indicator stops fading on and off
and remains steadily on.
Note: If Bluetooth connection appears to fail, or you
are unable to pair your device, press and hold Mute
on the speaker for 10 seconds until the indicators
briefly flash. Then press Power to turn the SoundLink
®
speaker II on again.
To connect a device
To connect a previously paired device, press
the Bluetooth button on the SoundLink
®
Mobile speaker II. The Bluetooth indicator on
the speaker flashes on and off approximately
twice every second until the device connects.
Then the indicator stops flashing and remains
on when the speaker and device have
successfully connected.
Bruiser_OG.book Page 15 Tuesday, June 26, 2012 10:29 AM