Operation Manual

Operation
English - 23
Programming the Solo 15 universal remote
You can program the universal remote to control your TV, DVD, Blu-ray Disc
™
player,
cable/satellite box, game system or DVR.
Programming your remote to control your source
1. Power on your source.
2. Locate the code for your source’s brand in the Universal Remote Device Codes
book (provided).
3. On the remote control, press and hold the appropriate source button until all six
source buttons glow, then release.
For example, to program your TV, press and hold
.
Only the appropriate source button glows.
4. On the number keypad, enter the code for your source’s brand.
Note:
If all six buttons blink three times, you entered an invalid code.
Repeat steps 3 and 4.
5. Press + on the volume button.
6. Test the source for basic functions:
• TV: press the channel buttons. Press . The settings menu appears.
Press and to navigate.
• Cable/satellite box: press . The programming guide appears.
Press
and to navigate.
• DVD or Blu-ray Disc
™
player: press . The settings menu appears.
Press and to navigate.
• Game system: press and to navigate through your menu.
7. If your source responds to basic functions, press to save
your settings.
If your TV does not power off
Use the remote control’s code scanner to find the code for your source.
1. Press + on the volume button to try another code.
Note:
If all six buttons blink three times, you have cycled through all codes for your
source.
2. Test the source for basic functions (see step 6 in “Program the remote to control
your source”).
3. Repeat steps 1 and 2 until your source responds.
4. Press to save your settings.
Note: Your source may not be compatible with universal remote controls. Refer to
your source owner’s guide for more information.