User's Manual

Beyond the Basics

Music center settings you can change

You can change some factory default settings of the PERSONAL

music center II, as you prefer.

By pressing the Setup button located near the bottom of the

PERSONAL

music center, you can see a list of the features that

are adjustable.

Note: To learn more about the house code, room code, and audio

stream, refer to the sections that follow.

To change settings for a feature

1. Tip the center bar down to move down the list in

the Setup menu, and highlight the feature you want to adjust

(Figure 13).

2. Press the right arrow button to move right for the

setting options for the selected feature.

3. Tip the center bar up or down to move through the

list and highlight the setting you want.

4. Press the center bar to confirm your choice.

5. Or, if you decide no change is needed, press the left arrow

button instead.

Following step 4 or 5 will exit the list of options and return to the

features list.

Figure 13

Music center

settings that you

can adjust

Back Open

Setup

Name: Bedroom

Contrast: Default

Backlight Bright: 100%

Backlight Delay: 8 sec

LCD Delay: 30 sec

Room Code: B

6789

Features Possible Settings

Name Default: Bedroom.

The room where your PERSONAL

music center is used.

Choose from a list of 35 possible rooms to label your music

center and distinguish it from any others.

Contrast Distinct differences between display text and background.

Increase or reduce the contrast as needed.