Installation Instructions

SYSTEM SETUP

TAB 5TAB 4TAB 6TAB 8TAB 7English TAB 3TAB 2

3. Place the rear speakers toward the back of the

room behind the viewers at ear height (when

seated) or higher, if possible.

• Make sure the 50 ft (15.2 m) rear speaker cables

will reach from the speakers to the Acoustimass

module.

• Aim the speakers away from the listeners to pre-

vent them from pinpointing the exact location of the

sound source.

• If you have Jewel Cube

or Direct/Reflecting

cube speakers, rotate the cubes so that one

cube of each speaker points forward into the

room and the other points at a side wall to

create reflected sound.

4. Locate the colored connectors on the bottom panel

of the Acoustimass module.

5. Plug the speaker cables into the Acoustimass

module connectors. Be sure to match each cable

plug to each connector by the color code.

Left rear

(LR)

Right rear

(RR)

Colored connectors

ResoluteVigilantSetup.book Page 9 Monday, December 7, 2009 11:59 AM