Cover_8.5x6.5_Setup Guide_3L.fm Page 1 Monday, November 9, 2009 2:47 PM LIFESTYLE V35/V25 HOME ENTERTAINMENT SYSTEMS LIFESTYLE T20/ T10 HOME THEATER SYSTEMS ® ® ©2010 Bose Corporation, The Mountain, Framingham, MA 01701-9168 USA AM324443 Rev.
ResoluteVigilantSetup.book Page ii Monday, December 7, 2009 11:59 AM TAB 8 TAB 7 TAB 6 TAB 5 TAB 4 TAB 3 TAB 2 English SAFETY INFORMATION Please read this guide CAUTIONS: Please take the time to follow the instructions in this guide carefully. They will help you set up and use your system properly so you can enjoy its advanced features. Please save this guide for future reference. • Make no modifications to the system or accessories.
ResoluteVigilantSetup.book Page 1 Monday, December 7, 2009 11:59 AM English TAB 2 TAB 3 TAB 4 TAB 5 TAB 6 TAB 7 TAB 8 SYSTEM SETUP Welcome Starting with Kit 1, unpack each kit and set up its contents before unpacking the next one. ® ® Thank you for choosing a Bose LIFESTYLE system for your home. This guide provides step-by-step instructions for setting up your new system. There are two phases to the setup process: Physical setup phase: Placing the system components and connecting them together.
ResoluteVigilantSetup.book Page 2 Monday, December 7, 2009 11:59 AM TAB 8 TAB 7 TAB 6 TAB 5 TAB 4 TAB 3 TAB 2 English SYSTEM SETUP 1. Place the control console on a flat, stable surface near your TV. 11 Control console kit What you need for the following steps: From Kit 1 Power supply Control console Control console Audio input cable Note: Until your system is completely installed, it may be helpful to keep the control console positioned for easy access to its rear connection panel.
ResoluteVigilantSetup.book Page 3 Monday, December 7, 2009 11:59 AM English TAB 2 TAB 3 TAB 4 TAB 5 TAB 6 TAB 7 TAB 8 SYSTEM SETUP 2. Plug one end of the HDMI cable into an HDMI INPUT connector on your TV. If an HDMI cable is already connected to an HDMI input on your TV, you can use this one. Just disconnect the other end. 3. Plug the other end of the HDMI cable you are using into the connector labeled HDMI OUT Video to TV on the control console.
ResoluteVigilantSetup.book Page 4 Monday, December 7, 2009 11:59 AM TAB 8 TAB 7 TAB 6 TAB 5 TAB 4 TAB 3 TAB 2 English SYSTEM SETUP 4. Plug one end of the audio input cable into the Acoustimass Module connector on the control console. ® Make sure the flat surface with the arrow on the plug faces up. 5. Plug the power supply output cord into the control console Power connector. AC power cord Power Leave the other end of the cable on the floor.
ResoluteVigilantSetup.book Page 5 Monday, December 7, 2009 11:59 AM English TAB 2 TAB 3 TAB 4 TAB 5 TAB 6 TAB 7 TAB 8 SYSTEM SETUP 1. Place the Acoustimass module on the floor at the same end of the room as the TV. Make sure there is a live AC outlet nearby. 2 ® Acoustimass module kit What you need for the following steps: From Kit 2 Acoustimass module Acoustimass module 2. Lay the module on its side and locate the connector panel.
ResoluteVigilantSetup.book Page 6 Monday, December 7, 2009 11:59 AM TAB 8 TAB 7 TAB 6 TAB 5 TAB 4 TAB 3 TAB 2 English SYSTEM SETUP CAUTION: DO NOT stand the Acoustimass module on its front or back end. ® 4. Remove a power cord from the power cord kit. 5. Plug one end of the power cord into the AC Power connector on the Acoustimass module. Make sure you push the plug in as far as it can go. AC Power 3.
ResoluteVigilantSetup.
ResoluteVigilantSetup.book Page 8 Monday, December 7, 2009 11:59 AM TAB 8 TAB 7 TAB 6 TAB 5 TAB 4 TAB 3 TAB 2 English SYSTEM SETUP 1. Place the center front speaker on a stable and level surface directly above or below the center of your TV screen as in the following example. Left front (L) Right front (R) 2. Place one speaker to the left and one to the right of the TV. • Keep each speaker within 3 ft (1 m) of the TV screen to prevent too much separation of the sound from the picture.
ResoluteVigilantSetup.book Page 9 Monday, December 7, 2009 11:59 AM English TAB 2 TAB 3 TAB 4 TAB 5 TAB 6 TAB 7 TAB 8 SYSTEM SETUP 4. Locate the colored connectors on the bottom panel of the Acoustimass module. 3. Place the rear speakers toward the back of the room behind the viewers at ear height (when seated) or higher, if possible. Colored connectors Left rear (LR) Right rear (RR) • Make sure the 50 ft (15.2 m) rear speaker cables will reach from the speakers to the Acoustimass module.
ResoluteVigilantSetup.book Page 10 Monday, December 7, 2009 11:59 AM TAB 8 TAB 7 TAB 6 TAB 5 TAB 4 TAB 3 TAB 2 English SYSTEM SETUP 6. Locate the speaker position markings on the free ends of the speaker cables. 7. Using the speaker position markings, run each cable out to its respective speaker as in the following setup example of a room.
ResoluteVigilantSetup.book Page 11 Monday, December 7, 2009 11:59 AM English TAB 2 TAB 3 TAB 4 TAB 5 TAB 6 TAB 7 TAB 8 SYSTEM SETUP 8. Connect the speaker cable to the type of speaker you have. For Jewel Cube speakers: ® 9. Put the Acoustimass module in its final position: • Upright (BEST) or on either side (ALTERNATE). ® Insert the plug into the speaker connector.
ResoluteVigilantSetup.book Page 12 Monday, December 7, 2009 11:59 AM TAB 8 TAB 7 TAB 6 TAB 5 TAB 4 TAB 3 TAB 2 English SYSTEM SETUP IMPORTANT! 4 • Before you start, make sure your speakers and Acoustimass module are in their final positions. Interactive kit What you need for the following steps: • Do not connect any devices to the control console at this time. The instructions provided on your TV will tell you when to do this. From Kit 4 1.
ResoluteVigilantSetup.book Page 13 Monday, December 7, 2009 11:59 AM English TAB 2 TAB 3 TAB 4 TAB 5 TAB 6 TAB 7 TAB 8 SYSTEM SETUP 4. Press the power button ( ) on the control console to turn on your system. Because the system is in a low power state when in standby, it takes several seconds to start. When the power light changes from blinking to steady green, your system is ready to use.
ResoluteVigilantSetup.book Page 14 Monday, December 7, 2009 11:59 AM TAB 8 TAB 7 TAB 6 TAB 5 TAB 4 TAB 3 TAB 2 English SYSTEM SETUP Applying rubber feet If you have setup problems When placing the Acoustimass module on bare floors, you can attach the included rubber feet to the bottom of the module for greater stability and to protect your floor.
03.RV_SetupOG_Setup.
LIFESTYLE V35/V25 HOME ENTERTAINMENT SYSTEMS LIFESTYLE T20/ T10 HOME THEATER SYSTEMS ® ® ©2010 Bose Corporation, The Mountain, Framingham, MA 01701-9168 USA AM324443 Rev.
