Lifestyle® VS-2 Video Enhancer LIFESTYLE® VS–2 VIDEO ENHANCER ©2008 Bose Corporation, The Mountain, Framingham, MA 01701-9168 USA AM301726 Rev.
English IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions – for future reference. 3. Heed all warnings – on the product and in the owner’s guide. 4. Follow all instructions. 5. Do not use this apparatus near water – Do not use this product near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, near a swimming pool, or anywhere else that water or moisture are present. 6. Clean only with a dry cloth – and as directed by Bose Corporation.
English SAFETY INFORMATION CONTENTS Please read this installation guide Please take the time to follow this installation guide carefully. It will help you set up and operate your system properly, and enjoy all of its advanced features. Save your installation guide for future reference. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 WARNING: To reduce the risk of fire or electric shock, do not expose the system to rain or moisture.
English Introduction About your LIFESTYLE® VS-2 video enhancer TV ® The LIFESTYLE VS-2 video enhancer allows you to connect more than one audio/video device to your LIFESTYLE® home entertainment system. With this accessory installed, a single button press selects the source video and audio at the same time. Features and benefits Video out to TV • Incorporates HDMITM (High-Definition Multimedia Interface) technology to help maximize your home theater experience.
English Unpacking Carefully unpack the VS-2 video enhancer. Check to be sure your system includes the parts shown on this page. Save all packing materials in case you need to repack and transport your product. VS-2 video enhancer Software update disc Owner’s guide If any part of the product appears damaged, do not attempt to use it. Notify Bose or your authorized Bose® dealer immediately. For Bose contact information, refer to the address sheet included in the carton.
English Connecting the VS-2 to Your Media Center Preparation Media center rear panel When setting up a LIFESTYLE® system with the VS-2, the media center power supply plugs into the VS-2 instead of the media center. • If you are setting up the VS-2 and your LIFESTYLE® system at the same time, find the media center power supply in the LIFESTYLE system carton before you begin.
English Your TV Connection Options Identifying your TV connectors Your TV may have some or all of the video input connectors shown on the right. Each type of video connector provides a different level of video image quality. Examine the rear panel of your TV and determine whether it has HDMI, component, S-Video, or composite video input connectors. For additional instructions, refer to the owner’s guide that came with your TV.
English Using an HDMI TV Connection Connecting the VS-2 HDMI output to your TV TV To connect your TV to the VS-2 using the supplied HDMI cable, do the following: 1. Plug one end of the HDMI cable into the HDMI connector on the rear of your TV. 2. Plug the other end of the HDMI cable into the Video OUTPUT HDMI connector on the VS-2. 3. Go to page 9 for instructions on connecting other A/V devices to the VS-2.
English Choosing connection types for your A/V devices 1. Look at the rear panel of each A/V device to determine what type of video output connectors it has. 2. In the following table, choose the type of available video connector that provides the highest possible video quality. We recommend using either an HDMI or Component connection if they are available. Place a check mark in the table for the connector type used for each of your A/V devices.
English Using a Component Video TV Connection Connecting the VS-2 component video output to your TV TV You need to obtain a component video cable from Bose or your local electronics dealer to complete this connection. To connect your TV to the VS-2 using a component video cable (not supplied), do the following: 1. Plug one end of the component video cable into the component connectors on the rear of your TV. Be sure to match the color of each plug to the color of each connector. 2.
English Choosing connection types for your A/V devices 1. Look at the rear panel of each A/V device to determine what type of video output connectors it has. 2. In the following table, choose the type of available video connector that provides the highest possible video quality. We recommend using a component connection if it is available. Place a check mark in the table for the connector type used for each of your A/V devices.
English Using an S-Video TV Connection Connecting the VS-2 S-Video output to your TV TV You can use the S-Video cable included with your LIFESTYLE® system to make this connection. To connect your TV to the VS-2 using an S-Video cable, do the following: 1. Plug one end of the S-Video cable into the S-Video connector on the rear of your TV. 2. Plug the other end of the S-Video cable into the Video OUTPUT S-Video connector on the VS-2. 3.
English Choosing connection types for your A/V devices VS-2 If you connected your TV to the VS-2 using an S-Video cable, you can use only an S-Video or Composite connection for your A/V devices even though a device may have HDMI or component video output connectors. 1. Look at the rear panel of each A/V device to determine what type of video output connectors it has. 2. In the following table, choose the type of video connector that provides the highest possible video quality.
English Using a Composite Video TV Connection Connecting the VS-2 composite video output to your TV TV You can use the composite video cable included with your LIFESTYLE® system to make this connection. To connect your TV to the VS-2 using a composite video cable, do the following: 1. Plug one end of the composite video cable into the composite video connector on the rear of your TV. 2. Plug the other end of the composite video cable into the Video OUTPUT Composite connector on the VS-2. 3.
English Choosing connection types for your A/V devices VS-2 If you connected your TV to the VS-2 using a composite video cable, you can use only an S-Video or Composite connection for your A/V devices even though a device may have HDMI or component video output connectors. 1. Look at the rear panel of each A/V device to determine what type of video output connectors it has. 2. In the following table, choose the type of video connector that provides the highest possible video quality.
English Program Recording Connections Connecting your cable/satellite box to your VCR/DVR To record programs from your cable or satellite service, you can connect your cable/satellite box to your VCR or DVR. The diagram on this page is an example of how this equipment may be connected. Before you start, make sure that your cable/satellite box and VCR/DVR have the necessary input and output connectors available.
English Operating Information New System menu items When the VS-2 is connected to your LIFESTYLE® system, the following new items will appear in the System menu. Video options New Item Possible Settings (Factory/default settings in bold type) Widescreen TV No..................... Tells your LIFESTYLE® system that it is connected to a 4:3 TV. Yes .................... Tells your LIFESTYLE® system that it is connected to a 16:9 (widescreen) TV. Video Resolution (only for HDMI TV connection) Adjustable .
English New Settings menu items When the VS-2 is connected to your LIFESTYLE® system, the following new items appear in the Settings menu. New Menu Item Description Possible Settings (Factory/default settings in bold type) Audio Delay Changes the amount of delay between audio and video. Used to synchronize the audio with the action when viewing audio/video program content.
English Switching sources Adding the VS-2 to your system setup greatly simplifies source selection. Just press the remote button (CD/DVD, VCR, CBL•SAT, or AUX) for the source you want to use. If you select one of the sources connected to the VS-2, be sure the source is turned on.
English Mounting Your VS-2 on a Wall Required tools 1 Install two screws 12 inches apart. Leave ¼ inch (6 mm) between wall surface and screw head. 2 Position the VS-2 mounting holes over the screws so that it is flush with the wall. Recommended hardware For solid wood 18 -inch (3.5 mm) drill bit No. 8 x 1½-inch (M4 x 36 mm) wood screws For wallboard Use drill size specified for type of wall anchor used. No. 8 (M4) wall anchor No.
English Maintaining Your VS-2 Cleaning • Use only a soft, dry cloth to clean the outside of the VS-2. • Do not use any solvents, chemicals, or cleaning solutions containing alcohol, ammonia, or abrasives. • Do not allow liquids to spill into any openings. • Do not use any sprays near the VS-2.
English Technical information Copyright and license protections Dimensions ©2008 Bose Corporation. No part of this work may be reproduced, modified, distributed, or otherwise used without prior written permission. All trademarks referenced herein are property of Bose Corporation. 15.6" W x 4.8" D x 1.6" H (39.55 cm x 12.07 cm x 4.
English Limited Warranty Other Rights: EXCLUSIVE REMEDY: What is covered: ® All parts defective in material and workmanship.
Lifestyle® VS-2 Video Enhancer LIFESTYLE® VS–2 VIDEO ENHANCER ©2008 Bose Corporation, The Mountain, Framingham, MA 01701-9168 USA AM301726 Rev.
