Installation Instructions

System Setup
14 - English
E. Plug the free end of the speaker cable into the SPEAKERS connector
on the Acoustimass
®
module.
Turn in each thumb screw until it is finger tight.
Thumb
screw
F. Put the Acoustimass module in its final position:
• Upright (BEST) or on either side (ALTERNATE).
BEST ALTERNATE
• With the front opening facing into the room.
• At least 18 in (45 cm) from any TV to avoid magnetic interference with
the TV image. Move it farther away if you still notice interference.
CAUTIONS:
• Do not put electronic media, such as video or audio tapes, on or next
to the Acoustimass module for long periods of time. The magnetic field
surrounding the module may erase some or all of the recorded material.
• Do not block the ventilation openings on the module. This can cause it to
overheat.
Ventilation
openings
G. Congratulations! At this point you have set up the control console, the
Acoustimass
®
module, and the speakers. You are now ready to turn on
your system and enter the interactive phase of the setup process using
the UNIFY
®
intelligent integration system.
Continue with Box
4
on the next page.