Operating instructions

ManualsBrandsBose ManualsComputer equipmentL1 Model I

model 1S system

with ToneMatch

port

Owner’s Guide

Guía de usuario

Notice d’utilisation

Summary of content (22 pages)

PAGE 1
L1® model 1S system with ToneMatch® port Owner’s Guide Guía de usuario Notice d’utilisation
PAGE 2
Svenska Nederlands Italiano Français Svenska Nederlands Español Français Deutsch Italiano Deutsch Español Dansk English SAFETY INFORMATION Please read this owner’s guide Please take the time to follow the instructions in this owner’s guide carefully. It will help you set up and operate your system properly and enjoy its advanced features. Please save this owner’s guide for future reference. WARNING: To reduce the risk of fire or electrical shock, do not expose the system to rain or moisture.
PAGE 3
English Deutsch Español Dansk Français Deutsch Italiano Nederlands Español Français Svenska Italiano Nederlands Svenska IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8.
PAGE 4
Svenska Nederlands Italiano Français Svenska Nederlands Español Français Deutsch Italiano Deutsch Español Dansk English INTRODUCTION Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Features and benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Product overview . . . . . .
PAGE 5
English Deutsch Español Dansk Français Deutsch Italiano Nederlands Español Français Svenska Italiano Nederlands Svenska INTRODUCTION Welcome Thank you for purchasing the Bose® L1® model 1S system with ToneMatch® port. Based on a revolutionary new technology, this system brings the benefits of an intimate acoustic concert to amplified performance. This owner’s guide provides detailed setup and operating instructions for your L1 system and explains how to connect equipment to it.
PAGE 6
Svenska Nederlands Italiano Français Svenska Nederlands Español Français Deutsch Italiano Deutsch Español Dansk English INTRODUCTION Product overview The L1® model 1S system – with ToneMatch® port consists of: the power stand, bottom extension, top array, and a B1 or B2 bass module. The system also comes with a padded carrying bag for each of its parts. To expand your system and enhance performance, you can add: • A second B1 bass module for bass guitar, kick drum, or organ.
PAGE 7
English Deutsch Español Dansk Français Deutsch Italiano Nederlands Español Français Svenska Italiano Nederlands Svenska INTRODUCTION Connections and controls The top panel of the power stand provides system connectors and controls (Figure 2). Figure 2 Power stand top panel Power/Fault LED Indicates power status. Blue = system on Red = system fault Power switch Switches the system on and off. Bass Module Out Bass output signal for driving one or two B1 bass modules.
PAGE 8
Svenska Nederlands Italiano Français Svenska Nederlands Español Français Deutsch Italiano Deutsch Español Dansk English SYSTEM SETUP Parts list The L1® system is shipped in three cartons. Carefully unpack the cartons and check that you have all the items listed on this page. WARNING: To avoid danger of suffocation, keep the plastic bags out of the reach of children.
PAGE 9
English Deutsch Español Dansk Français Deutsch Italiano Nederlands Español Français Svenska Italiano Nederlands Svenska SYSTEM SETUP Positioning your system Placing the power stand in the right location is an important part of setting up this product. Determining the best location for your performance depends on several things.
PAGE 10
Svenska Nederlands Italiano Français Svenska Nederlands Español Français Deutsch Italiano Deutsch Español Dansk English SYSTEM SETUP Setting up the power stand 1. Holding the power stand vertically on the foor (Figure 2A), grasp one leg and swing it out as far as it will go. Notice that the other legs swing out automatically. The legs must be fully open before you can plug the extension into the power stand. 2. Lay the power stand flat on the floor in the desired position (Figure 2B).
PAGE 11
English Deutsch Español Dansk Français Deutsch Italiano Nederlands Español Français Svenska Italiano Nederlands Svenska SYSTEM SETUP Connecting to AC power 1. Make sure the power switch is off. 2. Plug one end of the AC power cord into the AC Mains connector on the power stand. 3. Plug the other end into a live AC (mains) receptacle (Figure 4). Figure 4 CAUTION: DO NOT block or cover the handle opening, which is part of the ventilation system.
PAGE 12
Svenska Nederlands Italiano Français Svenska Nederlands Español Français Deutsch Italiano Deutsch Español Dansk English SYSTEM SETUP Connecting the B1 or B2 bass module You can place the B1 or B2 bass module either vertically or horizontally on the floor. It fits neatly bewteen the legs of the power stand. 1. Plug one end of the B1 or B2 bass module cable into one of the bass connectors. Rotate the plug clockwise to lock it in place. You should hear a soft click as it locks. 2.
PAGE 13
English Deutsch Español Dansk Français Deutsch Italiano Nederlands Español Français Svenska Italiano Nederlands Svenska SYSTEM SETUP Adding a T1 ToneMatch® audio engine (optional) The T1 ToneMatch® audio engine provides additional input/output capabilities to your  system, plus digital signal processing to customize the way you sound. The audio engine comes with hardware for mounting it on the left or right side of the bottom extension.
PAGE 14
Svenska Nederlands Italiano Français Svenska Nederlands Español Français Deutsch Italiano Deutsch Español Dansk English SYSTEM SETUP Adding a second B1 bass module (optional) The bass module output of the power stand can adequately drive one or two B1 bass  modules. When placed horizontally, the modules are stackable (Figure 7). CAUTION: Do not connect more than two B1 bass modules to the Bass Module Out  connector on the power stand.
PAGE 15
English Deutsch Español Dansk Français Deutsch Italiano Nederlands Español Français Svenska Italiano Nederlands Svenska OPERATING INFORMATION OPERATING INFORMATION Setting the analog input level When connecting an audio source to the Analog Input, follow these steps to adjust the input Trim control. 1. Set the Trim control on the power stand to the 0 (zero) position. 2. Connect the audio source to the Analog Input. 3. Adjust the volume of the audio source to the desired level. 4.
PAGE 16
Svenska Nederlands Italiano Français Svenska Nederlands Español Français Deutsch Italiano Deutsch Español Dansk English OPERATING INFORMATION Figure 2 Single system with guitar and microphone T1 ToneMatch® audio engine Multiple musicians In this scenario, a keyboard-guitar duo sings and plays through a single T1 ToneMatch audio engine and an L1® system.
PAGE 17
English Deutsch Español Dansk Français Deutsch Italiano Nederlands Español Français Svenska Italiano Nederlands Svenska OPERATING INFORMATION Full band A full band scenario is built around multiple T1 ToneMatch® audio engines and L1® systems. Each musician plays and sings through a single T1 ToneMatch audio engine and L1 system.
PAGE 18
Svenska Nederlands Italiano Français Svenska Nederlands Español Français Deutsch Italiano Deutsch Español Dansk English OPERATING INFORMATION DJ events DJs use many types of input sources (CD player, turntable, MP3 player, etc.) plugged into a mixer. In this scenario, two mixer outputs can be fed into two L1® systems for stereo sound.
PAGE 19
English Deutsch Español Dansk Français Deutsch Italiano Nederlands Español Français Svenska Italiano Nederlands Svenska CARE AND MAINTENANCE CARE AND MAINTENANCE Caring for your product Cleaning • Clean the product enclosures using only a soft, dry cloth. • Do not use any solvents, chemicals, or cleaning solutions containing alcohol, ammonia,  or abrasives. • Do not use any sprays near the product or allow liquids to spill into any openings.
PAGE 20
Svenska Nederlands Italiano Français Svenska Nederlands Español Français Deutsch Italiano Deutsch Español Dansk English CARE AND MAINTENANCE Problem What to do With nothing plugged into the power stand, a slight hum or buzz is heard • Using an AC outlet tester, test the AC outlet that the power stand is plugged into for reversed or open (hot, neutral, and/or ground) contacts. • If using an extension cord, make sure that the cord is also tested as above.
PAGE 21
English Deutsch Español Dansk Français Deutsch Italiano Nederlands Español Français Svenska Italiano Nederlands Svenska CARE AND MAINTENANCE Limited Warranty and Registration Your product is covered by a limited warranty. Details of the warranty are provided with your product. Register your products online at www.Bose.com/register or call (800) 905-1044. Failure to do so will not affect your warranty rights. Accessories Visit www.Bose.