Data Sheet

Footnotes
(1) Frequency response and range measured on-axis in half-space environment with recommended EQ
(2) Sensitivity measured on-axis in half-space environment averaged 100 Hz – 10 kHz using recommended high-pass protection
(3) Maximum SPL calculated from sensitivity and power handling specifications, exclusive of power compression
(4) Bose extended-lifecycle test using pink noise filtered to meet IEC268-5, 6-dB crest factor, 500-hour duration
(5) AES standard 2-hour duration with IEC system noise
(6) Tested to iP55 per EN60529 when used in General Purpose Audio applications. Tested to iP33C per EN5 54-24 for fire and
evacuation notification applications
(7) Measured in whole-space environment
PHYSICAL
Enclosure Material Engineered plastics, highly UV fade-resistant
Bracket Material Powder-coated steel
Grille Perforated steel, powder-coated finish, tamper-resistant design
Logo Rotatable, removable
Color Black (similar to Ral 9005), White (similar to Ral 9003)
Environmental/Ingress Protection
(6)
Rated for direct-exposure outdoor installations (IP55 per EN60529; IP33C per EN54-24). Suitable for
use outdoors in wet locations. Includes weather-resistant input cover. Optional accessory aluminum
grille for harsh environments to prevent red corrosion is available.
Safety Agency Certification: EN54-24:2008 for Voice Alarm Systems, UL 1480 UUMW, CAN/ULC-S541 UUMW7 for
Speakers for Fire Alarm and Signaling Systems. Installation: NFPA 70, NFPA 72, CSA C22.1
Section 32
For EN54-24 specifications, Refer to FS2SE EN 54-24 Certified Ratings document on pro.bose.com.
EN54-24 Equilization required for EN54-24 use.
Operating Temperature Range
-25 °C to 70 °C (-13 °F to 158 °F)
Connectors Euroblock 6-pin connector with loop-through, mounted on top. Accepts 18 AWG (0.8 mm2) to 14
AWG (2.5 mm2) size wire. Includes input cover.
Suspension/Mounting
External U-bracket with bracket screws
7 preset mounting angles: 0°, +15°, +30°, or +45° for wall or ceiling placement
Two (2) rear M8 screw inserts for use with optional Ceiling Mount Ceiling Mount Bracket S2,
DMSBRKT pan-and-tilt bracket
Safety cable can be used with either of two (2) rear M6 inserts when using included U-bracket,
or with either of two (2) side M5 inserts, when using optional brackets
Dimensions (H × W × D)
182 × 113 × 114 mm (7.1 × 4.4 × 4.5 in)
Dimensions with Bracket (H × W × D)
196 × 113 × 135 mm (7.7 × 4.4 × 5.3 in)
Net Weight, Loudspeaker with Grille and Bracket
(Single)
1.43 kg (3.15 lb)
Shipping Weight (Pair)
4.17 kg (9.2 lb)
Included Accessories
Each FS2SE includes one (1) Bose logo for vertical orientation, one (1) U-Bracket
and one (1) weather-resistant input cover
Optional Accessories
Aluminum Grille kit (2-pack), DesignMax DMSBRKT pan-and-tilt bracket (for indoors),
Ceiling Mount Bracket S2, Ceramic Terminal and Thermal Fuse Kit (10-pack)
PRODUCT CODES
841151-0310 FREESPACE FS2SE PAIR BLK
841151-0410 FREESPACE FS2SE PAIR WHT
PRO.BOSE.COM 2 OF 4
FreeSpace FS2SE
surface-mount loudspeaker