Bose® FreeSpace® 3 Loudspeaker System Installer’s Guide Installationsvejledning Installateur-Anleitung Guía de instalación Notice d’installation Guida all’installazione Installateurs handleiding Monteringsanvisningar
Safety Information Safety reminders English 1.1 1.2 1.3 1.4 1.5 1.6 1.7 Read and keep all safety and operating instructions for future reference. For your safety, follow all cautions and warnings in the operating instructions and on the speakers. Follow the instructions in this guide carefully when installing this product. Do not install the loudspeakers near water or excessive humidity. This includes installations near spas, swimming pools, dish washing and laundry equipment, and cooking areas.
Installation 1.0 Package contents 1.1 FreeSpace® 3 Acoustimass® module carton English (1) Rear connections cover (1) Acoustimass module with partial bracket attached (1) Wall-mount bracket section 1.
Installation 2.0 Loudspeaker installation English 2.1 Amplifier output connection WARNING: Complete all connections before you plug in and turn on the amplifier. 2.1.1 70V/100V transformer use Connecting an amplifier output to a single module in a 100V system using the transformer Press to open each wire clamp 100V 70V COM • PA Note: Jumpers required for 70V/100V operation. For transformer bypass, remove jumpers from transformer settings and use 4-8Ω input.
Installation 2.2 Transformer tap setting or bypass • Note: Jumpers required for 70V/100V operation. For transformer bypass, remove jumpers from transformer settings and use 4-8Ω input. NC 25W 50W 100W 200W TRANSFORMER SETTINGS + English Lower Wattage: The transformer tap is set at the factory for 200W use. To set it for lower wattage, remove the end of the + jumper wire that is connected to 200W and reattach it to the appropriate tap (100W, 50W, or 25W).
Installation • Connecting a stereo source with the transformer bypassed Note: Jumpers required for 70V/100V operation. For transformer bypass, remove jumpers from transformer settings and use 4-8Ω input.
Installation • Using 4 satellite speakers with direct connections NC 25W 50W 100W 200W English Note: Jumpers required for 70V/100V operation. For transformer bypass, remove jumpers from transformer settings and use 4-8Ω input.
Installation 2.5 Mounting and wiring satellite speakers English Choose a position and mounting method consistent with local building codes and regulations. Use four screws per bracket. 2.5.1 2.5.2 2.5.3 2.5.4 1.6 (4.1 3" cm) PN 18 18 87 1.6 (4.1 3" cm) 8 2.5.5 2.5.6 2.5.7 2.5.
Installation 2.5.9 2.5.10 5.88" cm) (14.9 English 2.5.11 2.6 Mounting and wiring the module Choose a mounting position, method, and hardware consistent with local building codes and regulations. Use at least three mounting screws. 2.6.1 a. b. 8" (20.3 cm) 4 (11. .
Installation English 2.6.2 2.6.3 2.6.4 100W 50W 25W 12W SETTINGS Note: Jumpers required for 70V/100V operation. For transformer bypass, remove jumpers from transformer settings and use 4-8Ω input.
Specifications 3.
Warranty Limited Warranty Bose Product ® What is covered: All parts defective in material and workmanship. For how long: Five years from the purchase date. What we will do: We will, at our sole option, repair or replace any defective parts free of charge. What we will not do: Pay shipping or transportation charges from you to us. What you must do: 1. Return product personally with proof of purchase from an authorized Bose dealer to your authorized Bose dealer, or 2.
©2001 Bose Corporation The Mountain Framingham, MA 01701-9168 USA 263114 AM Rev.
