Bose® FreeSpace® 4400 System User Interfaces Operating Guide ® FreeSpace 4400 System AVM 1-Zone User Interface FreeSpace® 4400 System AVM 2-Zone User Interface FreeSpace® 4400 System Page User Interface
Important Safety Instructions For the intended audience This guide has been written for professional installers of sound systems. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. Read these instructions – for all components before using this product. Keep these instructions – for future reference. Heed all warnings – on the product and in the installer’s guide. Follow all instructions. Do not use this apparatus near water or moisture. Clean only with a dry cloth – and as directed by Bose.
Provided in carton FreeSpace® 4400 System AVM 1-Zone User Interface E/ L MUT VO TO AU OR FreeSpace® 4400 System AVM 2-Zone User Interface ME LU VO CE UR SO ME LU VO CE UR SO / L TE MUTO VO AU E/ L VO MUT TO AU OR FreeSpace® 4400 System Page User Interface 3
Also needed (not provided) Double-gang junction box RJ45 connector* Cat 5 cable (with 4 twisted pairs)* *FreeSpace® 4400 System AVM 2-Zone User Interface requires the use of two (2) RJ45 connectors and two (2) Cat 5 cables. Note: Cable for use in-wall must be CL or CM rated for the application (plenum use, riser use, general use etc.) per the National Electrical Code (NEC). Recommended cable lengths 2000 ft (610 m) max. One wall plate using CAT 5 4400 1300 ft (396 m) max.
Assembly MU AU TE / TO VO L 5
Assembly* ME LU SO SO UR CE UR CE VO ME LU VO / TE MU VOL TO AU E/ MUTVOL TO AU *For AVM 2-Zone user interface only.
Wiring User interface schematic - AVM 1-Zone (Auto Volume/Mute) 12345678 +5VD +5VD .
Wiring User interface schematic - AVM 2-Zone (Auto Volume/Mute) 12345678 12345678 +5VD +5VD +5VD +5VD .33µF C7 .
Wiring User interface schematic - Page user interface: 12345678 +5VD +5VD .
Wiring Installer’s Note: Use only standard ethernet (Cat 5) cable which is acceptable by the local or national code to connect the user interface to the FreeSpace® 4400 system. DO NOT use crossover (XOV) cables. WALL PLATE CONNECTOR BLOCK 4400 RJ45 PIN 1-8 POS 1 PIN 1 POS 2 PIN 2 POS 3 PIN 3 POS 4 PIN 4 POS 5 PIN 5 POS 6 PIN 6 POS 7 PIN 7 POS 8 PIN 8 PIN 8 PIN 1 Connect the user interface from each zone to the appropriate WALL PLATE CONNECTION jack.
Using a junction box Install a double-gang electrical box for each user interface. The Bose® FreeSpace® 4400 System AVM 1-Zone User Interface, FreeSpace® 4400 System AVM 2-Zone User Interface, and FreeSpace® 4400 System Page User Interface are designed to fit a North American, Japanese, Australian, and some European doublegang junction boxes. • Mount a North American or Japanese box vertically, as shown. • Mount a European or Australian box horizontally, as shown.
Mounting After connecting the wires, mount the user interface in the junction box. Two sets of screws are provided. Use the screws that are appropriate for your junction box: Use #6 for North American boxes, or M4 for Japanese, European, and Australian boxes. CAUTION: Do not overtighten the screws. Overtightening may cause the frame to break. User interface frame Cover MU AU TE / TO VO L After securing the user interface frame to the junction box, snap the cover onto the frame.
AVM (Auto Volume/Mute) User Interface Operation The FreeSpace® 4400 System AVM 1-Zone User Interface and FreeSpace® 4400 System AVM 2-Zone User Interface provide source selection, volume up/down, and Mute or Auto Volume on/off controls.
AVM (Auto Volume/Mute) User Interface Operation The FreeSpace® 4400 System AVM 2-Zone User Interface provides two sets of source selection, volume up/down, and Mute or Auto Volume on/off controls for use with two zones.
AVM (Auto Volume/Mute) User Interface Operation • Press 1, 2, or 3 to select the audio source connected to the LINE 1, LINE 2, or LINE 3 input, respectively. A green LED indicates the active source. • Press (Volume up) or (Volume down) to increase or decrease the volume in 2 dB steps. Press and hold for continuous increase/decrease. The red LED lights when either button is pressed. • The maximum/minimum volume setting is determined by the min./max. level stop settings in the Output Gain control pane.
Page User Interface Operation The page user interface provides keys to select single paging zones, all paging zones and initiate a page. When mapped, the paging zone 1 button will select the lowest numbered output ZONE to which the PAGE source is assigned. The paging zone 2 button will select the next lowest numbered output ZONE to which the PAGE source is assigned, and so forth.
Dimensions MUTE / AUTO VOL Note: The Bose® FreeSpace® 4400 System AVM 2-Zone User Interface, and FreeSpace® 4400 System Page User Interface are the same dimensions as the FreeSpace® 4400 System AVM 1-Zone User Interface shown above.
Limited Warranty Bose® Product Sales Conditions Limited Warranty Policy and Conditions of Sale Bose Corporation The Mountain, Framingham, MA 01701 What is covered: All parts defective in material and workmanship.
How you can obtain Limited Warranty service: You can ship the system to either a Bose Service Agency or to Bose directly with a proof of purchase from an authorized dealer. Please: A. Properly and carefully pack the product for shipping. If you need a carton for shipping, contact Bose for a new carton. B. Label and ship the product to the appropriate Bose location. C. Contact Bose to get a return reference number. Place this number prominently on the outside of the carton.
©2007 Bose Corporation, The Mountain Framingham, MA 01701-9168 USA AM306641 Rev.
