Data Sheet

PRO.BOSE.COM 1 OF 4
TECHNICAL DATA
DesignMax DM10S-SUB
surface-mounted subwoofer
Key Features
Deliver instantly impressive sound with custom Bose drivers — no DSP or EQ required. For even better sound, use select Bose
DSPs and amplifiers to enable Bose loudspeaker EQ
Blend into any room design with elegant form factors, minimum-bezel grilles available in black or white, and removable logos
Reduce installation time with the patented QuickHold mounting system, which also reduces strain, hassle, and the chance of
product damage
Install easily — includes Euroblock connectors; deliver high SPL for demanding applications
Technical Specifications
SINGLE LOUDSPEAKER PERFORMANCE
Frequency Response (-3 dB)
(1)
41 - 108 Hz
Frequency Range (-10 dB)
(1)
35 - 125 Hz
Nominal Coverage (H × V) Omnidirectional below 200 Hz
Nominal Coverage Angle (1 - 10 kHz) Omnidirectional below 200 Hz
Bose extended-lifecycle test
(4)
AES component test
(5)
Power Handling, long-term continuous 250 W 300 W
Power Handling, peak 1000 W 1200 W
Sensitivity (SPL/ 1W @ 1 m)
(2)
90 dB 90 dB
Calculated Maximum SPL @ 1 m
(3)
114 dB 115 dB
Calculated Maximum SPL @ 1 m, peak 120 dB 121 dB
Recommended Crossover 80 - 200 Hz (requires active crossover in DSP)
Recommended High-Pass Protection 40 Hz with recommended 18 dB / octave filter
Overload protection Resistor-network power reduction with automatic reset
Transformer taps
70V: 20, 40, 80, 150 W, bypass
100V: 40, 80, 150 W, bypass
TRANSDUCERS
Low Frequency 1 x 10-inch woofer (254 mm)
Nominal Impedance 8 ohms (transformer bypass)
Product Overview
DesignMax loudspeakers bring outstanding audio
and aesthetics to any commercial space. The 250-
watt DM10S-SUB subwoofer features a 10-inch
woofer and delivers a 35 Hz - 125 Hz frequency
range. The DM10S-SUB is surface-mounted and
locks onto a hidden QuickHold U-bracket. With
both black and white versions available, the
DM10S-SUB is easy to integrate with any décor.