Data Sheet

DesignMax DM10P-SUB
pendant subwoofer
PRO.BOSE.COM 1 OF 4
For additional specifications and application information, please visit PRO.BOSE.COM.
Specifications subject to change without notice. December 2020.
TECHNICAL DATA
Product Overview
Delivering rich low-end performance, the DesignMax
subwoofers bring instantly impressive bass to any
commercial sound installation. The 300-watt DM10P-SUB
is a 10-inch pendant subwoofer with a 40 Hz – 125Hz
frequency range and features a recessed single-point
suspension system for a sleek, attractive appearance. All
models are available in black or white.
Key Features
Complete any commercial sound installation with 16
DesignMax loudspeakers to mix and match, including
in-ceiling, surface-mount, and pendant form factors,
subwoofers, high-SPL compression-driver models, compact
low-profile models, and outdoor-rated options
Choose from three DesignMax subwoofer models — the 180-watt in-ceiling DM8C-SUB, the 300-watt surface-mounted DM10S-
SUB, and the sleek 300-watt DM10P-SUB pendant subwoofer
Deliver rich bass performance with custom Bose drivers; for optimal performance, use select Bose DSPs and amplifiers to enable
Bose loudspeaker EQ and SmartBass processing, which expands performance and response at any listening level
Blend with any room design with elegant form factors, minimum-bezel grilles available in black or white, and removable logos
Install easily with industry-standard accessories — all models include Euroblock connectors; in-ceiling models include plenum-
rated backcans, tile bridges, and front-access audio wiring that makes installation and troubleshooting easier
Provide an open, attractive aesthetic with pendant loudspeakers featuring a recessed single-point suspension system that keeps
hardware out of sight and can be used to hold and hide a service loop for easy access
Technical Specifications
SINGLE-LOUDSPEAKER PERFORMANCE
Frequency Response (–3 dB)
1
46 – 108 Hz
Frequency Range (–10 dB)
1
40 – 125 Hz
Nominal Coverage Angle Omnidirectional below 200 Hz
AES transducer test
4
Bose extended-lifecycle test
5
Power Handling, long-term continuous 300 W 250 W
Power Handling, peak 1200 W 1000 W
Sensitivity (SPL / 1 W @ 1 m)
2
85 dB 85 dB
Calculated Maximum SPL @ 1 m
3
110 dB 109 dB
Calculated Maximum SPL @ 1 m, peak 116 dB 115 dB
Recommended Crossover 80 – 200 Hz (requires active crossover in DSP)
Loudspeaker EQ Not required, Bose EQ voicing, and SmartBass processing available
Recommended High-pass Protection 45 Hz with recommended 24 dB/octave filter
Transformer taps
70V: 20, 40, 80, 150 W, bypass
100V: 40, 80, 150 W, bypass