User guide

Bose
®
ControlSpace
™
Designer
™
Software User Guide
Introduction
i
Introduction
Welcome to the Bose ControlSpace Designer software user guide.
ControlSpace Designer software allows you to design and configure the
signal processing and controls for an engineered sound system.
ControlSpace Designer software, along with the ESP-88 Engineered
Sound Processor, the CC-64 Control Center, and the CC-16 Zone
Controller, provides a powerful, and flexible DSP solution for nearly any
installation. This user guide covers the following topics:
• Chapter 1: Configure the ControlSpace Designer network
• Chapter 2: The ControlSpace Designer software interface
• Chapter 3: Build a ControlSpace ESP-88 system
• Chapter 4: Store system programming
• Chapter 5: Program user controls: CC-64 and CC-16
• Chapter 6: Program GPI/O and Serial Input/Output
• Chapter 7: Signal Processing (SP) Tool Kit reference
• Chapter 8: Menu and Toolbar reference
System Requirements
•Microsoft
®
Windows
®
XP Professional, Service Pack 2 (or later)
•Microsoft
®
.NET
™
Framework version 1.1
• Intel
®
Pentium
®
4 850Mhz processor (or better)
• 512 MB RAM
• 100 MB disk space available
• CD-ROM Drive
• 1024x768 32 bit XGA color video display adapter
Install ControlSpace Designer software
Follow these steps to install ControlSpace Designer software:
1. Insert the ControlSpace Designer installation CD into the CD-
ROM drive in your computer.
2. Open Windows Explorer and navigate to the CD directory.