User guide

Bose
®
ControlSpace
™
Designer
™
Software User Guide
48 Chapter 3: Build a ControlSpace ESP-88 system
Working with signal processing blocks
After placing signal processing blocks into the ESP-88 window, you can
move one or more blocks around by selecting and dragging them with the
mouse. You can also use the arrow keys on your keyboard to nudge the
blocks into position. To line up blocks, use the options in the Edit menu.
For example, to vertically align the left borders of a group of blocks, select
all the blocks and choose Edit > Align Left Sides:
Figure 3.20 - Align Left Sides
Note: The output of a signal processing block can be wired to more than
one input, but a signal processing block can only accept one input
wire.