User guide

Bose
®
ControlSpace
™
Designer
™
Software User Guide
40 Chapter 3: Build a ControlSpace ESP-88 system
Note: Available audio cards may differ from those shown in the Audio
Cards dropdown menus.
You can also expand the functionality of the ESP-88 by installing an
additional General Purpose Input/Output card, or the DSP expansion
card. Specify the DSP card and GPI/O card configuration at the bottom of
the Properties window.
Figure 3.7 - DSP and GPI/O card configurations
ESP-88 window
Signal processing is configured in the ESP-88 window. The ESP-88
window is accessed by clicking on an ESP-88 tab at the top of the window
or by double-clicking on an ESP-88 in Project View. If you have more
than one ESP-88 in your design each will have a separate tab. The ESP-
88 window is a block diagram display of the processing inside the
selected ESP-88 unit, including inputs, outputs, signal processing blocks,
and the GPI/O and Serial Inputs/Outputs.
Figure 3.8 - ESP tabs