User guide

Bose
®
ControlSpace
™
Designer
™
Software User Guide
36 Chapter 3: Build a ControlSpace ESP-88 system
Project View
Project View is a workspace where you add and connect the hardware
components in your system design. These components are dragged from
the Device List on the left and dropped into Project View on the right.
Figure 3.1 - Drag and Drop devices into Project View
Project View allows you to graphically lay out the system design. The
only required components are the ESP-88 and any CC-64s and CC-16s
that are part of your design. Other devices, such as microphones and
loudspeakers, can be added for your reference only, they do not perform
any function in ControlSpace Designer software.
Note: You must wire any CC-16s in your design to an ESP-88 in Project
View. All other wiring is technically optional, but can be added as a
graphical reference.