User guide

Bose
®
ControlSpace
™
Designer
™
Software User Guide
28 Chapter 2: The ControlSpace Designer Software Interface
Double-click on the CC-64 to open the CC-64 Smart Simulator:
Figure 2.12 - The CC-64 Smart Simulator
The Smart Simulator window displays a graphical representation of the
CC-64 in the top half, and a programming tree in the bottom half. Program
the user controls by dragging and dropping signal processing blocks,
parameter sets, or groups into the programming tree. You can then
simulate the operation of the CC-64 using the knobs and buttons in the
top half of the display.