User guide

Bose
®
ControlSpace
™
Designer
™
Software User Guide
Chapter 2: The ControlSpace Designer Software Interface
23
Figure 2.7 - ESP-88 window
The Signal Processing Tool Kit (SP Tool Kit) on the left contains all the
individual signal processing blocks (SP blocks) that you can use to build
the signal processing for your design. Simply drag and drop these blocks
into the ESP-88 window on the right to configure your system.
The ESP-88 window shows all the physical inputs and outputs to the
ESP-88. The ESP-88 in Figure 2.7 has two input cards (in Slot 1 and Slot
3) and two output cards (in Slot 2 and Slot 4) installed. At the top of the
window are the General Purpose Inputs (GPI), General Purpose
Outputs (GPO), and Serial input and Serial output control blocks.