User guide

Bose
®
ControlSpace
™
Designer
™
Software User Guide
16 Chapter 1: Configure the ControlSpace Designer network
This window lists all connected ESP-88s, CC-64s, and CC-16s.
Press the Scan button to refresh the list. The new firmware
version number (from the file in the bin folder) will show up in the
Latest version column, and the current firmware version number
is displayed in the Loaded version column. If your firmware is
up-to-date, the loaded and latest versions will be the same, and
the status will be “up-to-date.”
5. Select the devices to update by placing a checkmark in the box
next to the IP address. Press the Update button to load the new
firmware.
6. After updating is complete, click OK when you are prompted to
reboot all devices.
Figure 1.18 - Reboot devices after firmware update