User guide
Bose
®
ControlSpace
™
Designer
™
Software User Guide
Chapter 1: Configure the ControlSpace Designer network
15
Update firmware
To update firmware, you will first need to get the new firmware file. Follow
these steps to update the firmware:
1. The latest firmware files can be downloaded at http://
pro.bose.com.
Firmware for the ESP-88 is a .frm file.
Firmware for the CC-64 is a .mot file.
Firmware for the CC-16 is a .hex file.
2. Place the new firmware file into the bin folder within the
ControlSpace directory on your hard drive. If you installed
ControlSpace into the default location, the address for the bin
folder is C:\Program Files\Bose\ControlSpace\bin.
3. Launch ControlSpace Designer software and connect any ESP-
88s and CC-64s to the local network that your computer is
connected to.
4. In ControlSpace Designer software, go to System > Update
Firmware.
The Firmware update window opens.