User guide

Bose
®
ControlSpace
™
Designer
™
Software User Guide
200 Chapter 8: Menu and Toolbar reference
Go on-line /
Go off-line
When connected to the ControlSpace hardware, go on-line to
upload your system design, or download from the hardware,
and to adjust settings in real time. The background in Project
View, and the ESP-88 window turn blue to indicate that you are
now working online.
When you are online, press the Go off-line button to
disconnect.
Scan Use the Scan feature to detect hardware on your local network.
Do not press the Scan button while you have an existing
project open. This may result in a conflict that can cause a
change in your system design configuration. Scan should be
used with a blank new project only, as a means to identify what
hardware exists on the local network. When ControlSpace
Designer software completes the scan, the Project View is
automatically populated with the ESP-88s, CC-64s, and CC-
16s that are properly connected in your local network.
System Mute Mute all audio output when working online.