User guide

Bose
®
ControlSpace
™
Designer
™
Software User Guide
Chapter 1: Configure the ControlSpace Designer network
11
Figure 1.12 - Change IP address in the Address setting window
Type 177 for the last three digits of the New IP Address, and
press Change.
Figure 1.13 - Successful IP address change dialog
You will see a dialog indicating a successful IP address change.
4. Press OK to reboot the CC-64.
5. After reboot, connect the second CC-64 to your Ethernet hub.
This CC-64 has an IP address ending in 176, so it will not conflict
with the first CC-64 that you connected, which now has an IP
address ending in 177.