User guide

Bose
®
ControlSpace
™
Designer
™
Software User Guide
160 Chapter 7: Signal Processing (SP) Tool Kit reference
Figure 7.22 - 2 Bass Array control panel
MB4 2x EF180Hz MB4 2x Endfire Bass Array, 180Hz crossover.
The MB4 2x Endfire Bass Array preset provides 180
degree conical dispersion @ 160Hz. The crossover is
set at 180Hz and is recommended for use with MA12,
MB4 and 02 Series speakers.
An MB4 2x Endfire Bass array uses two MB4
loudspeakers spaced 23 inches (58.4 cm) on center
from each other.
MB4 2x EF280Hz MB4 2x Endfire Bass Array, 280Hz crossover.
The MB4 2x Endfire Bass Array preset provides 180
degree conical dispersion @ 160Hz. The crossover is
set at 280Hz and is recommended for use with MA12,
MB4 and LT Series speakers.
An MB4 2x Endfire Bass array uses two MB4
loudspeakers spaced 23 inches (58.4 cm) on center
from each other.