User guide

Bose
®
ControlSpace
™
Designer
™
Software User Guide
144 Chapter 7: Signal Processing (SP) Tool Kit reference
Figure 7.7 - 4 way crossover control panel
The top section of the control panel is a graphical representation of the
crossover settings. The line to the left represents the low frequency output
level, the left-middle line represents the low mid frequency output level,
the right-middle line represents the high mid frequency output level, and
the line to the right represents the high frequency output level. Use the
bottom section of the control panel to adjust crossover settings. The low
mid and high mid sections include type and frequency settings for both
ends of these curves.
Link
Press the Link button between the low and low mid groups to lock the low
pass and low mid high pass frequencies to the same number. Press the
Link button between the low mid and high mid groups to lock the low mid
low pass and high mid high pass frequencies to the same number. Press
the Link button between the high mid and high groups to lock the high
mid low pass and high pass frequencies to the same number. Linking is
only an option when both types are set to Butterworth or Linkwitz-Riley. If
link is off, the frequencies can be adjusted independently.