User guide

Bose
®
ControlSpace
™
Designer
™
Software User Guide
114 Chapter 6: Program GPI/O and Serial Input/Output
To open the GPI control panel, double-click on the GPI block in the ESP-
88 window.
Figure 6.2 - Open the GPI control panel
Use the programming tree in the bottom half of the GPI control panel to
assign functions that are invoked by the eight General Purpose Inputs.
You can drag and drop signal processing blocks, parameter sets, groups,
or presets onto the text lines. The top half of the GPI control panel
contains Mode buttons to switch between operating modes, and Test
buttons to simulate the behavior of an assigned function.