User guide

Bose
®
ControlSpace
™
Designer
™
Software User Guide
98 Chapter 5: Program user controls: CC-64 and CC-16
Figure 5.14 - Drag the locked CC-64 into a parameter set
If you want to change the CC-64 lock status in the parameter set, you
must reset the lock and then re-drag the CC-64 into the parameter set.
Note: Be careful not to add a parameter set to a CC-64 that locks itself
unless you have another user control that can unlock the CC-64.
Otherwise the user can become “locked out” of the system.