Speaker System User's Manual

ArabicS. ChinThai KoreanNederlands
7
English FrançaisEspañol
SETTING UP
Choosing a speaker location
The angled design of these speakers allows them to direct sound
upward toward a seated listener. So placing them on a desktop is a
good choice. Magnetic shielding protects your computer monitor from !
interference when the speakers are positioned close to it.
Place the speaker that has a volume control knob on the front within
easy reach to the right of your computer. Place the other speaker on the
left (Figure 2).
Note: LEFT and RIGHT labels on the back of the two speakers can serve
as a placement aid.
Figure 2
Speakers in
position near
the computer
RIGHT
speaker
LEFT
speaker
Volume
control
Headphone
jack
You may prefer placing the RIGHT speaker on your left to more easily
reach the volume control and the headphone jack.
This does no harm, although it changes how you hear the left and right
stereo sound. For an accurate sound stage, the music recorded from
stage left during a live performance comes from the left speaker. Chang-
ing the placement of LEFT and RIGHT speakers alters that effect.
Connecting the speakers
A speaker cable is attached to the rear of the LEFT speaker. Insert the
free end of this cable into the jack marked TO LEFT SPEAKER on the
back of the RIGHT speaker (Figure 3 on page 8).