Setup Guide

English – 9
SYSTEM SETUP
Putting the system together
Note: The CineMate
®
1 SR system uses the reflective surfaces of your room to deliver wide,
spacious sound. For best sound quality, the speaker array should not be placed inside a
cabinet, or diagonally in a corner.
Note: To avoid wireless interference, keep other wireless equipment, such as wireless
computer network routers, cordless phones, microwave ovens, or other WIFI-enabled
audio/video devices away from the speaker array and Acoustimass
®
module.
Step 1: Connect TV audio to the speaker array
What you need for this step:
A. Check the audio outputs on your TV and choose the type of connection you want to
make. A digital audio connection is recommended using an optical or coaxial digital
audio cable.
Speaker array
One of these audio cables:
Analog
stereo
Optical
digital
Coaxial
digital
Coaxial digital audio (recommended) – A digital audio connection
that passes digital data through a 75-ohm coaxial cable.
Optical digital audio (recommended) – A digital audio connection
that passes digital data in the form of pulsating light through a fiber
optic cable.
Analog stereo audio – The most common type of audio connection
where the left and right channel are connected separately.
TV
Hershey_Setup.book Page 9 Thursday, March 31, 2011 11:44 AM