CINEMATE® 1 SR DIGITAL HOME THEATER SPEAKER SYSTEM Setup Guide | Guía de instalación | Guide d’installation
SAFETY INFORMATION Please read this guide Please take the time to follow the instructions in this setup guide and in the operating guide carefully. They will help you set up and operate your system properly and enjoy its advanced features. Please save these guides for future reference. All Bose products must be used in accordance with local, state, federal, and industry regulations.
SAFETY INFORMATION Additional safety information See the additional instructions on the Important Safety Information sheet enclosed in the shipping carton. Important Safety Instructions 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
– English
CONTENTS WELCOME 6 Thank you . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Please play the DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Product overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Wall mounting kit . . . . . . . . . . .
WELCOME Thank you Thank you for choosing a CineMate® 1 SR digital home theater speaker system for your home. It delivers superb acoustic performance in a stylish package that will greatly enhance your home theater experience. Please play the DVD Before you start following the step-by-step setup instructions in this guide, we recommend playing the setup overview on the included DVD disc. This will show you how easy it is to set up your new system.
WELCOME Source connections to your TV Please be sure that all your sources, such as a cable/satellite set-top box or a DVD player, have both a video and an audio connection to your TV. • If you are connecting a source to your TV using an HDMI™ cable, there is no need for additional connections. The HDMI™ cable carries audio and video information.
WELCOME Remote control kit Remote control ADAPTiQ® audio calibration headset CINEMATE® 1 SR DIGITAL HOME THEATER SPEAKER SYSTEM Operating Guide | Guía de usuario | Notice d’utilisation AA (IEC LR6) batteries Acoustimass module feet Speaker array extension feet Operating Guide Wall mounting kit The speaker array can be mounted on the wall. If you wish to do this, contact Bose to purchase the WB-135 Wall Mount Kit.
SYSTEM SETUP Putting the system together Note: The CineMate® 1 SR system uses the reflective surfaces of your room to deliver wide, spacious sound. For best sound quality, the speaker array should not be placed inside a cabinet, or diagonally in a corner. Note: To avoid wireless interference, keep other wireless equipment, such as wireless computer network routers, cordless phones, microwave ovens, or other WIFI-enabled audio/video devices away from the speaker array and Acoustimass® module.
SYSTEM SETUP B. Plug one end of the selected audio cable into the corresponding audio output connector on your TV. Note: If you are using an optical cable, be sure to remove the protective cover from the plug. When inserting the plug into the connector, make sure it is pushed in all the way. You may sense a slight resistance before you feel it click into place. C. Lay the speaker array grille-side down on the table in front of your TV and locate the TV input connections.
SYSTEM SETUP Step 2: Connect source audio to the AUX input What you need for this step: OR Optical digital cable Coaxial digital cable Note: If you currently have audio/video sources such as a cable/satellite set-top box and a DVD player connected to your TV, do not disconnect them. The audio output from the source should be connected to the TV and to the CineMate 1 SR speaker array. Refer to “Product overview” on page 6. A.
SYSTEM SETUP Step 3: Connect a power cord to the speaker array What you need for this step: Power cord Plug the small end of the power cord into the connector labeled Power. Note: Do not plug the power cord into an AC power outlet at this time. You will be instructed to do this later in the setup process.
SYSTEM SETUP Step 4: Route the cables A. Arrange the cables as needed for your setup location. B. OPTIONAL: Secure cables under the clips in the channel running along the length of the speaker array.
SYSTEM SETUP Step 5: Position the speaker array What you need for this step: OPTIONAL: Speaker array extension feet CAUTION: The speaker array must be placed on a solid flat surface. For proper support, all of the feet on the bottom of the speaker array must be resting on the table top. A. Turn the speaker array over and place it in front of your TV with the speaker grille facing into the room.
SYSTEM SETUP Step 6: Set up the Acoustimass® module What you need for this step: Acoustimass module Rubber feet Power cord CAUTION: Choose a stable and level surface for the Acoustimass module. Vibration can cause the speaker to move, particularly on smooth surfaces like marble, glass, or highly polished wood. A. When placing the Acoustimass® module on bare floors, or other smooth surfaces, attach the included rubber feet to the bottom of the module for greater stability and to protect your floor.
SYSTEM SETUP D. Place the Acoustimass module according to the following guidelines: • For best sound quality, stand the Acoustimass module on its feet along the same wall as your TV, or along any other wall in the front third of the room. • The front opening of the module can face any direction. • Make sure there is an AC outlet nearby. CAUTION: Do not operate the Acoustimass module on its front end, back end, side, or top.
SYSTEM SETUP First time startup Step 1: Install the remote batteries What you need for this step: Remote control (2) AA (IEC LR6) batteries A. Slide the battery cover off the back of the remote control. AA (IEC LR6) batteries (2) Battery cover B. Install the two provided AA (IEC LR6) batteries, matching the plus and minus ends of the batteries to the polarity markings inside the battery compartment. C. Slide the battery cover on until it snaps into place. Step 2: Run the ADAPTiQ® calibration.
SYSTEM SETUP A. Point the remote at the speaker array and press the system power button. B. Check that the power indicator on the speaker array is on (white), indicating the system is on, and that the status indicator is off. Status Power If the Status indicator is blinking orange: • There is no wireless connection between the speaker array and the Acoustimass® module. • See the Troubleshooting table in the back of the operating guide and follow the instructions for correcting the problem of “No Sound.
SYSTEM SETUP F. Follow the audible instructions given to you by the system. Note: After hearing the language prompt in English, you can press the ADAPTiQ button to select another language. Then press the volume up button to continue. Note: After you select your language and press the volume up button to continue, you can go back to the beginning of the process at any time by pressing the ADAPTiQ button. G.
11 Bose Corporation, The Mountain, Framingham, MA 01701-9168 USA AM343500 Rev 00 D
