Product Datasheet/Brochure

L1
®
Compact
portable line array system
TECHNICAL DATA SHEET
All information subject to change without notice.
® 2013 Bose Corporation
All trademarks are those of their respective owners.
Bose Professional Systems Division
7
OF 7
pro.Bose.com
Architects’ and Engineers’
Specifications
The system shall be a multiple driver, full-range portable
loudspeaker system with internally supplied power amplification
and active equalization for multiple operating modes as follows:
The transducer complement shall consist of six 2.00" (51 mm)
high-excursion drivers mounted in a curved Articulated Array
®
loudspeaker coupled with an integral 8" (203 mm) low-frequency
driver mounted in a ported bass enclosure. The loudspeaker array
shall be wired in a series/parallel configuration.
The nominal horizontal beamwidth of the loudspeaker shall
be 180°, and the vertical coverage shall be 40°. The system’s
power stand shall incorporate a ported venting system for the
low-frequency driver, tuned for 65 Hz. The power amplification
for transducers shall be supplied by the integrated power stand
providing 130 W continuous pink noise, band-limited from 65 Hz
to 14 kHz (±3 dB).
The input connectors of the power stand module shall consist of
one XLR with equalization for a dynamic handheld microphone,
one 1/4" TRS with selectable ToneMatch
®
signal processing
for acoustic guitar with piezo pickup, stereo RCA, and one 1/8"
TRS receptacle. The output connectors of the power stand shall
consist of one 1/4" balanced TRS or unbalanced TS and two RCA
unbalanced phone plugs.
The enclosure of the power stand shall be constructed of
polypropylene materials. The extension and array shall be
constructed of ABS materials. In collapsed tabletop mode, the
system’s outer dimensions shall be 16.5" H x 13.3" W x 16.8" D
(418 mm x 339 mm x 426mm). Its weight shall be 24.6 lb (11.2
kg). In extended operating mode, the system’s outer dimensions
shall be 78.5" H x 13.3" W x 16.8" D (1995 mm x 339 mm x 426
mm). Its weight shall be 29.2 lb (13.3 kg).
The system shall be capable of two operating modes; collapsed
tabletop or extended position by integrating height-extension
modules.
The loudspeaker shall be the Bose
®
L1
®
Compact portable line
array system.
Safety and Regulatory
Compliance
The L1
®
Compact system complies with the following
standards:
• UL/IEC/EN 60065 7th Edition Safety Standard for Audio
and Video Equipment
• Ecodesign Directive 2005/32/EC
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15
of the FCC rules. This product complies with the Canadian
ICES-003 Class A specifications. This product conforms to
the EMC Directive 2004/108/EC Under standards: EN55103-
1 & 2: 1997, Environment 2.
Product Codes
Power stand - 100V 318882-3100
Power stand - 120V 318882-1100
Power stand - 230V 318882-4100
Power stand - 240V 318882-5100
L1® Compact extensions 318881-0100
Accessories
T1 ToneMatch™ audio engine PC 042826
T1 ToneMatch™ audio engine
power supply
PC 042533
T1 ToneMatch™ audio engine
mic stand bracket
PC 042535