Owner's Guide
Safety Please take the time to follow the instructions in this owner's guide carefully. It will help you set up and operate your system properly and enjoy its advanced features. Please save this guide for future reference. All Bose products must be used in accordance with local, state, federal, and industry regulations.
Safety Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water or moisture. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
Safety Names and Contents of Toxic or Hazardous Substances or Elements Toxic or Hazardous Substances and Elements Lead (Pb) Mercury (Hg) Cadmium (Cd) Hexavalent (CR(VI)) Polybrominated Biphenyl (PBB) Polybrominated diphenylether (PBDE) PCBs X O O O O O Metal parts X O O O O O Plastic parts O O O O O O Speakers X O O O O O Cables X O O O O O Part Name O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is b
Contents Introducing SoundTouch™ from Bose® Key Benefits................................................................................................. 7 Introduction About your SoundTouch™ SA-4 amplifier...................................................... 8 System features.......................................................................................... 8 Setting up the System Unpacking the system.......................................................................................
Contents Personalizing your Presets How presets work............................................................................................... 23 What you need to know.............................................................................. 23 Playing a preset.................................................................................................. 23 Presets with the SoundTouch™ controller..................................................... 23 To set a preset...................
Introducing SoundTouch™ from Bose® With SoundTouch™, you can stream Internet radio, music services, and your music library. If you have Wi-Fi® at home, you’re ready to enjoy your favorite music in any room or outdoor space that you want. Key Benefits • Enjoy wireless access to Internet radio, music services, and your music library. • Stream your favorite music easily with personalized presets. • Works with your existing home Wi-Fi network.
Introduction About your SoundTouch™ SA-4 amplifier The SoundTouch™ SA-4 amplifier is an elegant way to deliver high-quality sound into any room or outdoor space streamed wirelessly over your home Wi-Fi® network. Use the free SoundTouch™ app to set up and control your system. See “Adding the system to your Wi-Fi® network” on page 10. System features • Easily connects to your choice of speakers for powerful sound anywhere around your home – even connects to outdoor speakers.
Setting up the System Unpacking the system Carefully unpack the carton and confirm that the following parts are included. Note: Do not connect any cables to the system until after you have launched the SoundTouch™ app. See “Connecting the system to your home Wi-Fi® network” on page 11. SoundTouch™ SA-4 amplifier AC (mains) power cord SoundTouch™ wireless adapter USB cable SoundTouch™ controller Save the carton and packing materials for transporting or storing the system.
Setting up the System Adding the system to your Wi-Fi® network Tip: A laptop is the preferred method for connecting to the network. If you must use a desktop computer, see “Appendix D: Using a desktop computer to connect to the network” on page 33. Before you can use SoundTouch™ you must install the SoundTouch™ app onto a computer that is on your home network. Next, you will use the app to connect the system to the network. The app guides you through the setup process.
Setting up the System Connecting the system to your home Wi-Fi® network 1. Launch the app by double-clicking the SoundTouch™ app icon. The first time the app launches, it guides you through setting up the system on your Wi-Fi network. The app instructs you to connect the system. 2. Place the SA-4 amplifier on a sturdy surface, close to an AC (mains) power source. 3. Connect the wireless adapter to the BoseLink INPUT connector on the back of the SA-4 amplifier. 4.
Setting up the System 6. When prompted by the app, plug the small end of the USB cable into the SETUP A connector on the SoundTouch™ wireless adapter. SoundTouch™ wireless adapter SETUP A connector 7. Plug the larger end of the USB cable into a USB port on your computer. When the SoundTouch™ app detects your system, the Wi-Fi® status indicator on the rear panel of the SoundTouch™ wireless adapter lights solid amber. The app instructs you to enter your network credentials. 8.
Setting up the System Installing the SoundTouch™ SA-4 amplifier Locate the SA-4 amplifier indoors, close to an AC (mains) power outlet. It does not need to be close to your speakers. The SoundTouch™ SA-4 amplifier weighs 11 lbs (5 kg). It can be placed on a floor, on a shelf, or mounted on a wall. See page 30 for wall mounting instructions. Consider the following caution statements when selecting a location for your SA-4 amplifier. CAUTIONS: • The SA-4 amplifier must be used indoors.
Setting up the System Connecting speakers to the SA-4 amplifier CAUTIONS: • Use only unpowered speakers. DO NOT connect any make or model of powered speakers. Doing so may cause damage to the equipment. • The SoundTouch™ SA-4 amplifier requires a 6-ohm minimum load. Speaker cables consist of two insulated wires. Often, one wire is marked (striped, colored, or ribbed), indicating it should be connected to the positive (+) terminal. The plain wire should be connected to the negative (–) terminal.
Controlling the System using the App 5. Follow the operating instructions for your unpowered speakers to connect the other end of the cables to the speakers. Make sure to connect the marked wires to the positive terminals. 6. Install the speakers in their permanent location. 7. Reconnect the SA-4 amplifier to AC (mains) power. Tip: Use a silicone caulking material such as RTV adhesive to protect speaker wire connections. It is commonly available at hardware stores.
Controlling the System using the App Downloading the app for your mobile device Bose® offers a free mobile version of the SoundTouch™ app so you can control the system from your smartphone or tablet. To install the app for your smartphone or tablet: • For iOS users: download the SoundTouch™ controller app from the App Store. • For Android™ users: download the SoundTouch™ controller app from the Google Play™ Store.
Using the System Playing music with the SoundTouch™ controller During the app set up process, the SoundTouch™ controller was activated and a wireless connection was established. You can use the SoundTouch™ controller to play and manage your presets. Note: The SoundTouch™ controller must be within 70 feet (21 m) of the SoundTouch™ wireless adapter in wood-construction homes. In concrete, stucco or brick homes, the range will likely be less and may vary.
Using the System Wall mounting the SoundTouch™ controller WARNING: The wall mount bracket contains magnetic material. Please contact your physician if you have any questions whether this might affect the operation of your implantable medical device. Follow these instructions to wall mount your SoundTouch™ controller. Use the bracket as a template to mark the holes. Tab Bracket Wallboard (anchors and screws supplied): 1. Use a ³/16 in. (5 mm) drill bit to drill two holes into ³/8 in. (9.
Using the System Playing an AirPlay stream In addition to playing content from Internet radio, music services, and your music library, you can also stream audio from an AirPlay device on the same Wi-Fi® network. 1. Start a music app on your AirPlay device. Tip: Adjust the volume on the AirPlay device to 75 percent of maximum to ensure optimal volume control from the SA-4 amplifier system. 2. On the device, tap or click (assigned during setup). 3. Start playing music from a music app.
Using the System SoundTouch™ wireless adapter Wi-Fi® status indicator The SoundTouch™ wireless adapter is powered by the SA-4 amplifier. The Wi-Fi status indicator is located on the back panel.
Advanced Features Alternate setup method Using this method you can set up your SoundTouch™ system by first joining its own built-in Wi-Fi® network, and then connecting to your home Wi-Fi network. 1. On the back of the SoundTouch™ wireless adapter, press and hold the Control button for 2-6 seconds. 2. When the Wi-Fi status indicator blinks amber once and lights solid amber, release the Control button. Wi-Fi status indicator Control button 3.
Advanced Features Disable/enable Wi-Fi® capability The SoundTouch™ wireless adapter has built-in Wi-Fi capability that enables it to wirelessly connect to your home Wi-Fi network. The Wi-Fi capability is disabled when the SoundTouch wireless adapter is placed in the Power Saving mode. Power Saving mode The SoundTouch™ wireless adapter has a low-power standby mode in which it consumes a minimum amount of power. This can be used to reduce the power consumed in your home while you are away.
Personalizing your Presets How presets work You can personalize six presets to your favorite streaming music services, stations, playlists, artists, albums, or songs from your music library. You can access your music at any time with a simple touch of a button on the SoundTouch™ controller. Tip: You can also access your presets using the SoundTouch™ app on your computer, smartphone, or tablet. See “Using the SoundTouch™ app” on page 15.
Care and Maintenance Adding a Wi-Fi® network If your network information has changed, or to connect your system to another network, you must add the new network information in the app and then connect the system. 1. Launch the SoundTouch™ app. 2. Click EXPLORE > SETTINGS > Systems. 3. Select the system. 4. Click CONNECT TO A WI-FI NETWORK. 5. Follow the instructions on your computer. Troubleshooting For more troubleshooting information, refer to the Help system in the SoundTouch™ app.
Care and Maintenance Problem What to do Neither speaker plays • Make sure the amplifier is connected to AC (mains) power. • Make sure the plug is inserted fully and the AC (mains) power outlet is powered. • Make sure content is selected via the SoundTouch™ app. • Disconnect the SoundTouch™ wireless adapter cable from the amplifier. Disconnect AC power from the SA-4 amplifier for three minutes. Reconnect the SoundTouch™ wireless adapter. Reconnect power to the SA-4 amplifier.
Care and Maintenance Cleaning CAUTION: Disconnect the power cord from the AC (mains) power outlet before cleaning. To clean the SA-4 amplifier, use only a soft, dry cloth to remove dust from the outside of the enclosure. You may use a brush attachment on a vacuum cleaner to clean the hard-to-reach areas. DO NOT use any solvents, chemicals, or cleaning solutions containing alcohol, ammonia, or abrasives. Customer service For additional help using the system, contact Bose customer service.
Technical Information SoundTouch™ SA-4 Amplifier Features • Bose® proprietary digital signal processing technology • Built-in digital volume control • Thermal overload protection Dimensions and Weight • 14¼ in. wide x 5½ in. deep x 4¼ in. high (36.2 cm x 14.0 cm x 10.8 cm) • 11.0 lb (5 kg) Power rating • USA/Canada: 120V 60 Hz, 400W • International: 220-240V 50/60 Hz, 400W Input sensitivity 0.
Technical Information SoundTouch™ wireless adapter Dimensions and weight • 2½ in. wide x 9⅜ in. long x 2 in. high (6.4 cm x 23.8 cm x 5.1 cm) • 12.0 oz (.34 kg) Temperature range 32° F to 104° F (0° C to 40° C) SoundTouch™ controller Dimensions and weight • 4⅛ in. diameter x 1⅛ in. high (10.5 cm x 2.8 cm) • 8.0 oz (.
Appendices Appendix A: SA-4 amplifier connector panel AC POWER VCA ROOM CODE switches BoseLink OUTPUT connector BoseLink INPUT connector SPEAKER OUTPUTS Status indicator Connector Description AC POWER AC power cord connector. Power is applied when the power cord is inserted and plugged into an AC (mains) outlet. There is no on/off switch on the SoundTouch™ SA-4 amplifier. VCA Local volume control connector. Allows you to control the volume using a wall-mounted control.
Appendices Appendix B: Wall mounting the SoundTouch™ SA-4 amplifier Vertical orientation Horizontal orientation Connector panel is facing left. Connector panel is facing up. Follow these instructions to wall mount your SoundTouchTM SA-4 amplifier. Install either vertically with the connector panel facing left, or horizontally with the connector panel facing up. 1. Remove rubber feet from the SA-4 amplifier. Use these holes to mount the amplifier on the wall. 2.
Appendices Note: Mounting hardware must be purchased separately. If the mounting hardware instructions differ from these instructions, follow the mounting hardware instructions. • Wood Mounting: Mount to 1 in. (25.4 mm) or thicker wood. Drill pilot hole with a ³/32 in. (2.38 mm) drill. Use (4) #10 x 1½ in. (M5 x 38 mm) pan-head wood screws. • Wallboard Mounting: Mount to ⅜ in. (9.5 mm) or thicker wallboard. Drill pilot hole with a ½ in. (12.7 mm) drill. Use (4) #10 x 2½ in. (M5 x 63.
Appendices Appendix C: Wall mounting the SoundTouch™ wireless adapter Vertical orientation Horizontal orientation Connector panel is facing left. Connector panel is facing up. Follow these instructions to wall mount your SoundTouch™ wireless adapter. Install either vertically with the connector panel facing left, or horizontally with the connector panel facing up. Note: Mounting hardware must be purchased separately.
Appendices Appendix D: Using a desktop computer to connect to the network If you have a desktop computer, temporarily move the SA-4 amplifier near the computer to set up the network connection. The diagram below shows how to temporarily set up your SA-4 amplifier and SoundTouch™ wireless adapter near your desktop computer. Once you have the components in place, follow the procedures in this guide to connect to your network using the desktop computer.
©2013 Bose Corporation, The Mountain, Framingham, MA 01701-9168 USA AM625304 Rev.
