manual

3
English
Tab 5, 11Tab 4, 10Tab 3, 9Tab 2, 8
Cleaning the headphones
The Bose AE2 audio headphones do not require scheduled
cleaning. Should cleaning be necessary, simply wipe the outside
surfaces with a soft cloth. Be sure the earcup ports are kept
clear, and that no moisture is allowed to get inside the earcup.
Replacement parts and accessories
Accessories or replacement parts can be ordered through Bose
Customer Service. See the contact information for your area
included in this guide.
Part Product Code
Carry bag: 329585-0010
Replacement cushions: 329586-0010
Replacement cable: 329583-0010
Reattaching earcup cushions
The earcup cushions are held in place
by a mounting flange which snaps
under 8 small tabs located around the
inside rim of each earcup. If an earcup
cushion becomes partially or
completely detached, push the
mounting flange of the earcup cushion
back into the earcup. Using your finger
or thumb, press around the edge of the
mounting flange, making sure it snaps
in place all the way around the earcup.
Troubleshooting
Problem What to do
No audio or audio in
one earcup only
• Ensure both ends of the audio cable
are firmly seated.
• Try a different audio device
Distorted bass • Ensure both ear cushions are firmly
secured.
Mis-shaped cushion • The high-density earcup foam will
regain its shape after a few minutes in
a neutral position.
If any problem persists, contact Customer Service. See the
phone number for your area included in this guide.
01_AroundEar-T2_ENG.fm Page 3 Monday, July 26, 2010 10:43 AM