Data Sheet
AMM112
multipurpose loudspeaker
PRO.BOSE.COM 2 OF 4
TECHNICAL DATA
For additional specifications and application information, please visit PRO.BOSE.COM. Specifications subject to change without notice. 4/2021
Technical Specifications
SINGLE-LOUDSPEAKER PERFORMANCE
Frequency Response (−3 dB)
1
70 – 18,000 Hz
Frequency Range (−10 dB) 60 – 20,000 Hz
Nominal Coverage Pattern 110° horizontal × 60° vertical
Tilt-back Angle 35°
Crossover Internal passive or external bi-amp; use Bose-recommended presets for
optimal performance
Power Handling, Long-term Continuous
2
300 W, passive
300 W (LF) + 45 W (HF), bi-amp
Power Handling, Peak
3
2800 W, passive
2800 W (LF) + 720 W (HF), bi-amp
Sensitivity (SPL/1 W @ 1 m)
4
96 dB, passive & bi-amp averaged
Calculated Maximum SPL @ 1 m
5
121 dB, passive & bi-amp averaged
Calculated Peak SPL @ 1 m 131 dB, passive & bi-amp averaged
TRANSDUCERS
Low Frequency 12-in (305 mm) woofer
High Frequency 3-in (76 mm) compression driver
Nominal Impedance 8 Ω, passive
8 Ω (LF) + 8 Ω (HF), bi-amp
PHYSICAL
Enclosure Material Baltic birch plywood
Finish 2-part spray polyurethane coating, black
Grille Perforated steel, powder-coated finish, black
Environmental
6
IP43-rated (front-of-house position only)
Connectors 2 × Neutrik® NL4 inputs with wired-parallel through
Suspension/Mounting 2 × 35 mm (1.4 in) pole cup (for pole-mounting)
6 × M10 threaded inserts (for accessory attachment or mounting)
Dimensions (Width × Height × Depth) 457 mm × 457 mm × 383 mm (18.0 in × 18.0 in × 15.1 in)
Net Weight 22.04 kg (48.60 lb)
Shipping Weight 26.22 kg (57.81 (lb)
Optional Accessories AMM112 U-Bracket Kit; AMM Suspension Bracket; ShowMatch SMS118 Speaker
Pole Mount Adaptor, M20 Thread
PRODUCT CODES
AMM112 Loudspeaker 843161-0110 (AMM112 MULTIPURPOSE LDSPKR)
AMM112 U-Bracket Kit 843364-0010 (AMM112 U-BRACKET)
AMM Suspension Bracket 843344-0010 (AMM SUSPENSION BRACKET)
ShowMatch SMS118 Speaker Pole Mount Adaptor, M20 Thread 863314-0010 (SPKR POLE MNT ADPTR - M20 THREAD)
(1) Frequency response and range measured on-axis in anechoic environment with recommended loudspeaker processing. Frequency response graphs display SPL axis with 0 dB line referenced to sensitivity SPL value.
(2) Bose extended-lifecycle test using pink noise filtered to meet IEC268-5, 6-dB crest factor, 500-hour duration.
(3) Bose peak power test using 12-dB crest factor pink noise, 96-hour duration with recommended loudspeaker processing.
(4) Sensitivity measured in anechoic environment with recommended loudspeaker processing.
(5) Maximum SPL calculated using sensitivity and power ratings, exclusive of power compression.
(6) IP43 rating applies when loudspeaker is positioned upright (front-of-house application). Rating does not apply when in tilt-back (monitor application) position.