Technical information
Table Of Contents
- Additional safety information
- Please read this owner’s guide
- Where to find…
- Before you begin
- Unpacking the carton
- Placing your speakers to achieve realistic home theater sound
- Connecting the speakers
- Connecting front cube speaker arrays to the Acoustimass module
- Figure 5
- Cube speaker array connections to the Acoustimass module
- 1. Connect the wire pair marked CENTER to the center cube speaker array. Press the terminal tab o...
- 2. Connect the wire pair marked RIGHT to the right front cube speaker array (to the right of the ...
- 3. Connect the wire pair marked LEFT to the left front cube speaker array.
- 4. Plug the other end of each cable into the CENTER FRONT, RIGHT FRONT, and LEFT FRONT blue RCA j...
- Connecting rear cube speaker arrays to the Acoustimass module
- 1. Connect the wire pair marked RIGHT REAR to the right rear cube speaker array (on your right as...
- 2. Connect the wire pair marked LEFT REAR to the left rear cube speaker array.
- 3. If you have a center rear cube speaker array (Acoustimass 16 system or upgraded Acoustimass 15...
- 4. Plug the other end of each cable into the RIGHT REAR, LEFT REAR, and CENTER REAR orange RCA ja...
- Connecting the Acoustimass® module to the receiver
- 1. Insert the multi-pin connector on the system input cable into the input jack on the Acoustimas...
- 2. Connect each wire pair on the other end of the system input cable to your surround receiver. C...
- 3. If applicable, connect the RCA plug marked LFE on the system input cable to the LFE/SUBWOOFER ...
- Cube speaker array connections to the Acoustimass module
- Figure 6
- Checking the connections
- Connecting the Acoustimass module to power
- Upgrading your Acoustimass 15 Series II speaker system
- For realistic home theater sound
- Setting your digital surround sound receiver
- Be sure to get the digital audio signal
- Setting your analog surround sound receiver
- Troubleshooting
- Customer service
- Cleaning the speakers
- Technical information
- Warranty period
- Accessories
17
Reference
Warranty period
Your Bose
®
Acoustimass
®
speaker system is covered by a limited transferable warranty.
Details of the warranty are provided on the warranty card that came with your system. Please
fill out the information section on the card and mail it to Bose.
Accessories
• Table stands: UTS-20B (black), UTS-20W (white)
• Floor stands: UFS-20B (black), UFS-20W (white)
• Wall brackets: UB-20B (black), UB-20W (white)
• Module input cable adapter for use with existing wiring:
PN267138-001 (black)
PN267138-002 (white)
• Module-to-cube speaker array cable adapter for use with existing wiring:
PN267139-001 (black)
PN267139-002 (white)
• Module 20 ft (6.1m) input extension cable:
PN267140-001 (black)
PN267140-002 (white)
AM264924_00 _V.pdf • August 13, 2002