Operation Manual

16
Maintaining Your System
Troubleshooting
Customer Service
For additional help in solving problems, contact Bose
®
customer service. Refer to the address
list on the inside back cover of this guide.
Problem What to do
No system operation
• Make sure the power cord for the Acoustic Wave
®
multi-disc changer is completely
plugged in both at the changer jack and at the wall outlet.
No sound or
sound is muffled
• If the Acoustic Wave
®
multi-disc changer or a component connected to it is playing, make
sure that AUX is displayed as the selection on the Acoustic Wave
®
music system display.
• If the sound source is an auxiliary component connected to the multi-disc changer,
make sure that component is plugged in and turned on.
• Make sure that both the Acoustic Wave
®
multi-disc changer and the Acoustic Wave
®
music system are plugged into functioning power outlets, and are turned on.
• Check the connection of the Acoustic Wave
®
music system to the changer. Make sure the
two RCA connectors are firmly inserted, red to red, and white to white, into the AUX IN
jacks on the Acoustic Wave
®
music system. Refer to “Connecting the multi-disc changer
to your Acoustic Wave
®
music system” on page 6.
• If the sound source is an auxiliary component connected to the multi-disc changer,
make sure the connections are fully and firmly inserted into jacks on both the changer
and on the component.
• Make sure nothing is blocking or preventing the IR signals emitted by the multi-disc
changer from reaching the receiver on the front of the Acoustic Wave
®
music system.
Refer to “Seating your Acoustic Wave
®
music system on the multi-disc changer” on
page 5.
CD skips • Does the unit get bumped in its current location? If so, move it to a more protected
location.
• Check the CD for smudges or dirt. Wipe the CD (NOT in a circular pattern, but straight out
from the center) to it clean off.
CD does not play • Make sure you have selected the changer or the CD player.
• If you have selected the changer, make sure AUX is the selection shown on the Acoustic
Wave
®
music system display. If it is not, press the AUX button on the music system
console.
• Make sure there is a CD is in the selected changer slot or in the CD player on the Acoustic
Wave
®
music system.
• Make sure CD is selected on the display of the Acoustic Wave
®
music system.
A CD is playing, but none
of the multi-disc changer
LEDs is lit
• Check to see if the CD player in the Acoustic Wave
®
music system is on and playing,
instead of the changer.
Downloaded from www.Manualslib.com manuals search engine