Technical information

7
Using Your Acoustic Wave
®
Multi-Disc Changer
Operating with one remote control
The remote control included with your Acoustic Wave
®
multi-disc changer allows you to con-
trol functions of both the multi-disc changer and your Acoustic Wave
®
music system. There-
fore, we suggest you put away the remote that came with your Acoustic Wave
®
music
system and use only this Acoustic Wave
®
multi-disc changer remote.
Notice that this remote (Figure 5) has buttons to play the multi-disc changer, the Acoustic
Wave
®
music system, and to select other external components connected to the changer.
Note: The Acoustic Wave
®
multi-disc changer remote can select an auxiliary component that
is connected to the changer, but cannot turn the component on or off or change its settings.
Figure 5
A new remote with
combined controls
Note: If the remote stops operating or its range seems reduced, it may be time to replace the
battery. However, be aware that a change in room lighting or other conditions, in addition to
battery age, can affect the operating range of an infrared remote control.
For instructions on battery replacement, refer to “Replacing the remote control battery” on
page 15.
Turn Acoustic Wave
®
music system on or off
Select:
PRESET radio station,
when tuned to FM or A
M
CD (1 through 5) when
system is set to CD
changer
Adjust volume
Play/Pause for multi-disc changer
Seek/Tune, when tuned
to FM or AM
Skip/Scan, when set
to CD or CD changer
Play/Pause for single CD player
(on top of the Acoustic Wave
®
music system)
Turn on the system and play
the appropriate sound source
STOP for CD changer
and
single CD player
Next disc selection
for multi-disc changer
AWMDC_OG.book Page 7 Monday, May 5, 2003 11:03 AM