User Manual

ManualsBrandsBose ManualsActive SubwoofersSub2 Powered Bass Module - 10 "x18" 1000W AMPLIFIED SUBWOOFER

Sub1 & Sub2

Powered Bass Modules

Owner's Guide

Summary of content (14 pages)

PAGE 1
Sub1 & Sub2 Powered Bass Modules Owner's Guide
PAGE 2
Important Safety Instructions Please read and keep all safety and use instructions. Important Safety Instructions B ose Corporation hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU and all other applicable EU directive requirements. The complete declaration of conformity can be found at: www.Bose.com/compliance. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5.
PAGE 3
PRO.BOSE.COM This device complies with part 15 of the FCC Rules and with ISED Canada’s license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling.
PAGE 4
Contents Overview PRO.BOSE.COM 5 Package Contents...................................................................................................................................................................................... 5 Optional Accessories................................................................................................................................................................................ 5 Setup 6 Connections and Controls.........................................
PAGE 5
Overview PRO.BOSE.COM Overview Package Contents Sub1 Sub2 Optional Accessories • Sub1/Sub2 Roller Bag • Sub1/Sub2 Adjustable Speaker Pole • SubMatch Cable For additional information on Sub1/Sub2 accessories, visit PRO.BOSE.COM.
PAGE 6
Setup PRO.BOSE.COM Setup Connections and Controls q Standby Button: Press the button to f power on the Sub. The LED will illuminate white while the Sub is on. w Line Inputs: Analog input for connecting PHASE/PATTERN q LEVEL d s CARDIOID LINE IN 1 LINE IN 2 LINE OUT 1 LINE OUT 2 e a connect the line-level output to a loudspeaker. Sub bass module with a SubMatch cable. Up to two Sub1 or Sub2 powered bass modules can be powered by a single L1 Pro32 via SubMatch connection.
PAGE 7
Setup PRO.BOSE.COM Connecting Power There are two ways to connect a Sub to power: connecting to a power outlet or connecting to an L1 Pro32 with a SubMatch cable. The Power Input Cover prevents simultaneous connection of both power inputs. Only one of the two power connections should be used at a time. If connecting directly to a power outlet, slide the Power Input Cover to the left, concealing the SubMatch Input.
PAGE 8
Setup PRO.BOSE.COM Connecting to an L1 Pro32 with a SubMatch Cable q 1. Sub1/Sub2 w L1 Pro32 e r t Plug the SubMatch cable into the SubMatch Input on a Sub1/Sub2. 2. Plug the other end of the SubMatch cable into the SubMatch Output of the L1 Pro32. 3. Plug the power cord into the Power Input on the L1 Pro32. 4. Plug the other end of the power cord into a live electrical outlet. Note: Do not power on the L1 Pro or the Sub until after you've connected your sources.
PAGE 9
Setup PRO.BOSE.COM Inputs and Outputs Line Input Analog input for connecting an L1 Pro or other line-level audio source. Compatible with XLR, TRS balanced, and TS unbalanced cables. Use Line Input 1 (Left) and Line Input 2 (Right) together for stereo applications. Line Output Use an XLR cable to connect the line-level output to a loudspeaker. Use Line Output 1 (Left) and Line Output 2 (Right) together for stereo applications. Settings Phase/Pattern Adjust the polarity of the Sub.
PAGE 10
Setup PRO.BOSE.COM Level Adjust the level of audio output from the Sub. Begin with the Level Control set to a low setting and increase the level until the Signal/Clip Indicator illuminates green. The Level Control does not affect the Line Outputs. The 12 o’clock position is recommended when in use with an L1 Pro32. If using two Subs with a single L1 Pro, it is recommended that the Level Control is set to the same position on both Subs.
PAGE 11
Setup PRO.BOSE.COM Using the Pole-mount Insert with an S1 Pro WARNING: The pole-mount M20 threaded insert on the Sub1 and Sub2 is designed to support a pole of up to 1.3 meters (51 inches) with a Bose S1 Pro mounted on the pole. Do not use the Sub1 or Sub2 with a pole exceeding 1.3 meters (51 inches) in height or a loudspeaker weight that exceeds 7.1 kilograms (15.7 pounds).
PAGE 12
Care & Maintenance PRO.BOSE.COM Care & Maintenance Cleaning Your Sub Clean the product enclosure using only a soft, dry cloth. If necessary, carefully vacuum the grille of the Sub. CAUTION: Do not use any solvents, chemicals, or cleaning solutions containing alcohol, ammonia, or abrasives. CAUTION: Do not use any sprays near the product or allow liquids to spill into any openings. Troubleshooting Problem What to do No power • Make sure you have power at the AC outlet.
PAGE 13