BASS MODULE 700
IMPORTA N T SA F ET Y I N STR UCT I O N S Please read and keep all safety and use instructions. Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8.
IMPORTA N T SA F ET Y I N STR UCT I O N S WARNINGS/CAUTIONS This symbol on the product means there is uninsulated, dangerous voltage within the product enclosure that may present a risk of electrical shock. This symbol on the product means there are important operating and maintenance instructions in this guide. This product contains a tempered glass surface. Use caution to avoid impact. In the event of breakage, use care in handling broken glass. This product contains magnetic material.
R EG U L ATORY I N FOR M AT IO N NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
R EG U L ATORY I N FOR M AT IO N The product, in accordance with the Ecodesign Requirements for Energy Related Products Directive 2009/125/EC, is in compliance with the following norm(s) or document(s): Regulation (EC) No. 1275/2008, as amended by Regulation (EU) No. 801/2013.
R EG U L ATORY I N FOR M AT IO N China Restriction of Hazardous Substances Table Names and Contents of Toxic or Hazardous Substances or Elements Toxic or Hazardous Substances and Elements Lead (Pb) Mercury (Hg) Cadmium (Cd) Hexavalent (CR(VI)) Polybrominated Biphenyl (PBB) Polybrominated diphenylether (PBDE) PCBs X O O O O O Metal Parts X O O O O O Plastic Parts O O O O O O Speakers X O O O O O Cables X O O O O O Part Name This table is prepared in accordance with
L EG A L IN FOR M AT ION Android, Google Play, and the Google Play logo are trademarks of Google LLC. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Bose Corporation is under license. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Apple and the Apple logo are trademarks of Apple Inc.
CON T EN TS WHAT’S IN THE CARTON Contents.............................................................................................................................. 10 BASS MODULE PLACEMENT Recommendations.......................................................................................................... 11 Placing a second bass module........................................................................... 12 POWER Connect the bass module to power..............................................
CON T EN TS BASS SETTING Choose your bass adjustment method................................................................... 22 Adjust the bass using the Bose Music app............................................................ 23 Adjust the bass using the SoundTouch 300 remote......................................... 23 Reset the bass........................................................................................................... 24 BASS MODULE STATUS Status light...........................
W HAT’S IN T HE CA RTON CONTENTS Confirm that the following parts are included: Bose Bass Module 700 Power cord* *May ship with multiple power cords. Use the power cord for your region. NOTE: If any part of the product is damaged or if the glass on the bass module is broken, do NOT use it. Contact your authorized Bose dealer or Bose customer service. Visit: worldwide.Bose.
BASS M OD UL E P L ACEM ENT RECOMMENDATIONS For best performance, follow these recommendations when placing the bass module: Do NOT place any objects on top of the bass module. To avoid wireless interference, keep other wireless equipment 1 – 3 ft. (0.3 – 0.9 m) away from the bass module. Place the bass module outside and away from metal cabinets, other audio/video components and direct heat sources. Place the bass module on a stable and level surface.
Bass M odule P lacement Placing a second bass module Try placing each bass module in multiple locations to see what sounds best for your listening area. After placing a module in a new location, run ADAPTiQ audio calibration (see page 18). For more bass, place the modules closer to each other or closer to walls and corners.
P OW ER CONNECT THE BASS MODULE TO POWER 1. Connect the power cord to the b connector on the bass module. 2. Plug the other end of the power cord into an AC (mains) power outlet.
CON N ECT TO A SOUN D BA R CHOOSE YOUR CONNECTION METHOD The way you connect the bass module depends on your soundbar. Choose your connection method from the table below. SOUNDBAR CONNECTION METHOD Connect using the Bose Music app (see page 15). Bose Soundbar 500 or Bose Soundbar 700 SoundTouch 300 soundbar NOTE: I f you can’t access or have trouble connecting using the Bose Music app, see “Troubleshooting” on page 27. Connect using your soundbar’s remote (see page 16).
Connect to a Soundbar CONNECT USING THE BOSE MUSIC APP 1. In the Bose Music app, from the My Bose screen, select your soundbar. 2. Tap the soundbar image in the bottom-right corner of the screen. 3. Tap Settings > Accessory Speakers > Add Bose Accessory Speakers. Follow the app instructions. New to the Bose Music app? 1. On your mobile device, download the Bose Music app. 2. Follow the app instructions. NOTE: For support information related to the Bose Music app, visit: global.Bose.
Connect to a Soundbar CONNECT USING THE SOUNDTOUCH 300 REMOTE 1. On the SoundTouch 300 remote, press the SoundTouch button e. 2. Press and hold k until the connectivity light l on the soundbar blinks white. Once connected, you hear a tone. The light on the back of the bass module and l on the soundbar glow white. NOTES: Connecting may take several minutes. If the bass module doesn’t connect to the soundbar, see “Troubleshooting” on page 27.
CON N ECT IN G TO A SOU N D BA R CONNECT A SECOND BASS MODULE (OPTIONAL) Connecting a second bass module may produce more consistent or powerful bass throughout your listening area. NOTES: For instructions on placing a second bass module, see page 12. If your current bass module is connected to your soundbar or system with a 3.5 mm audio cable (see page 30), you can’t connect a second bass module.
A DA P TI Q AUD I O CA L I BR ATI O N After setting up the bass module and connecting with the soundbar, run A DAPTiQ audio calibration for best acoustic performance. ADAPTiQ audio calibration customizes the sound of the system to the acoustics of your listening area by taking five audio measurements. To run an audio calibration, you need 10 minutes when the room is quiet.
A DA P Ti Q Audio Calibration RUN ADAPTIQ AUDIO CALIBRATION USING THE BOSE MUSIC APP Initial setup After you connect the bass module to your soundbar, the Bose Music app prompts you to run ADAPTiQ audio calibration. Follow the app instructions. Use the Settings menu If you later connect the optional Bose Surround Speakers or Virtually Invisible 300 surround speakers, move the bass module or move any furniture, run ADAPTiQ audio calibration to ensure optimal sound quality. 1.
A DA P Ti Q Audio Calibration RUN ADAPTIQ AUDIO CALIBRATION USING THE SOUNDTOUCH 300 REMOTE 1. Insert the ADAPTiQ headset cable into the a connector on the back of the SoundTouch 300 soundbar. ADAPTiQ 2. Put on the ADAPTiQ headset.
A DA P TI Q AUD I O CA L I BR ATI O N 3. On the remote, press the SoundTouch button e. 4. Press and hold f until the TV light g and the Bluetooth light l on the soundbar glow green. ADAPTiQ audio calibration begins. NOTE: If you don’t hear your language, press d and c on the navigation pad to cycle through languages. To reset the language, press and hold f for 10 seconds. 5. Follow the voice prompts until the ADAPTiQ process is complete.
BASS SET T IN G CHOOSE YOUR BASS ADJUSTMENT METHOD The way you adjust the bass depends on your soundbar. Choose your bass adjustment method from the table below. SOUNDBAR BASS ADJUSTMENT METHOD Bose Soundbar 500 or Bose Soundbar 700 Adjust the bass using the Bose Music app (see page 23). Adjust the bass using the SoundTouch 300 remote (see page 23). SoundTouch 300 soundbar NOTE: F or optimal sound quality for dialogue-only programs, such as news and talk shows, enable dialogue mode.
BASS SET T IN G ADJUST THE BASS USING THE BOSE MUSIC APP 1. In the Bose Music app, from the My Bose screen, select your soundbar. 2. Tap the soundbar image in the bottom-right corner of the screen. 3. Tap Adjustments to adjust the bass. ADJUST THE BASS USING THE SOUNDTOUCH 300 REMOTE 1. On the SoundTouch 300 remote, press h. The lights on the soundbar glow according to the current bass setting.
BASS SET T IN G BASS SETTING LIGHT ACTIVITY +4 +3 +2 +1 0 (default) -1 -2 -3 -4 2. Adjust the bass by doing one of the following: Press the Volume up button i to increase the bass. Press the Volume down button j to decrease the bass. 3. Press h. The soundbar saves your settings. Reset the bass On the remote, press and hold h until the SoundTouch light e on the soundbar blinks twice. The bass setting resets to original factory settings.
BASS M OD U L E STATUS STATUS LIGHT The light on the back of the module shows system status.
CA R E A N D M A IN T EN A N CE CLEAN THE BASS MODULE Clean the exterior of the bass module with a soft, dry cloth. CAUTIONS: Do NOT allow liquids to spill onto the bass module or into any openings. Do NOT use any sprays near the bass module. Do NOT use any solvents, chemicals or cleaning solutions containing alcohol, ammonia or abrasives. Do NOT allow objects to drop into any openings.
T R OUBL ESHOOTI N G TRY THESE SOLUTIONS FIRST If you experience problems with the bass module: Unplug the power cords for the bass module and soundbar, wait 30 seconds and plug them firmly into a live AC (mains) outlet. Secure all cables. Check the bass module status (see page 25). Move the bass module and soundbar away from possible interference (wireless routers, cordless phones, televisions, microwaves, etc.).
T roubleshooting SYMPTOM SOLUTION Unmute the system. Increase the volume. Confirm that the soundbar is playing audio. If not, refer to your soundbar owner’s guide for troubleshooting. Visit: Bose Soundbar 500: worldwide.Bose.com/Support/SB500 Bose Soundbar 700: worldwide.Bose.com/Support/SB700 Intermittent or no audio SoundTouch 300 soundbar: global.Bose.
T roubleshooting UNABLE TO COMPLETE ADAPTIQ AUDIO CALIBRATION WITH YOUR SOUNDTOUCH 300 SOUNDBAR If you can’t complete ADAPTiQ audio calibration with your SoundTouch 300 soundbar, listen to the voice prompts for the following error messages: ERROR MESSAGE PROBLEM WHAT TO DO The microphone on the ADAPTiQ headset can’t detect sound. Secure all cables. Disconnect the ADAPTiQ headset cable and reconnect it firmly into the soundbar’s a connector.
T roubleshooting CONNECT USING AN AUDIO CABLE You can also connect the module to the soundbar using a 3.5 mm audio cable (not provided). If you don’t have a 3.5 mm audio cable (commonly used for headphones and mobile devices), contact Bose customer service to receive this part. You can also purchase this part at your local electronics store. 1. Connect one end of a 3.5 mm audio cable to the x connector on the bass module. 2.
T roubleshooting SOUNDBAR Bose Soundbar 500 BASS MODULE CONNECTOR LOCATION BASS BASS Bose Soundbar 700 31 | ENG
T roubleshooting SOUNDBAR BASS MODULE CONNECTOR LOCATION ACOUSTIMASS SoundTouch 300 soundbar 32 | ENG
T roubleshooting 33 | ENG
©2018 Bose Corporation, The Mountain, Framingham, MA 01701-9168 USA AM772090-0020 Rev.
