User Manual
Table Of Contents
- Bose Connect App
- What’s in the Box
- Importance of Proper Fit
- Headset Controls
- Acoustic Noise Cancellation
- Operation Switches
- Microphone Placement
- Batteries
- Aircraft Connectors
- Status Lights
- Bluetooth Connections
- Managing Multiple Bluetooth Connections
- Bluetooth Functions
- Care and Maintenance
- Troubleshooting
- Installation
- Technical Information
OPERATION SWITCHES
23
|
ENG
OPERATION SWITCHES
FUNCTION POSITION DEFAULT DESCRIPTION
Auto o
On Power o automatically after 3 to 45 minutes
of inactivity.
NOTES:
• When running on battery power and
unplugged from the intercom, the headset
powers o unless there is an active mobile
device audio present.
• If you are on a call and unplugged from
the intercom, the headset powers o
approximately three minutes after the call
is ended.
Tap control
O Don’t respond to Tap Control interaction
(see page 21).
CHANGE THE OPERATION SWITCHES
1. Power o the headset. See page 19.
2. On the back of the control module, press down firmly on the finger indent and
slide the cover down.
CAUTION: The battery cover is tethered to the control module. Do NOT attempt
to detach it.
3. Remove the batteries.
4. Using a pen or a small, flat-tipped screwdriver, gently move the switch.