User's Manual
Table Of Contents
- 00_Cover
- 01_AM799905_0020_ENG_print
- Getting Started
- Setting Up the System
- Using the Remote Control
- SoundTouch® App Setup
- Existing SoundTouch® Users
- Preset Personalization
- Bluetooth Technology
- Choosing your pairing method
- Connect your mobile device
- Pair a device with NFC
- Control your connected mobile device from the remote control
- Connect using the Bluetooth feature on your mobile device
- Connect using your remote control
- Disconnect a mobile device
- Pair another mobile device
- Reconnect a device
- Clear the system's Bluetooth pairing list
- Advanced Features
- Getting System Information
- Care and Maintenance
- Troubleshooting
- Appendix A: Installation Reference
- Front console panel
- Back console panel
- Connecting an OmniJewel™ base
- Installing the front speakers
- Connecting the front speakers to the console
- Attaching the rubber feet to your center speaker
- Connecting the center speaker to the console
- Installing the rear speakers
- Identifying switch settings on wireless receivers
- Connecting the rear speakers
- Connecting the rear speakers to power
- Mounting your speakers
- Appendix B: System Maintenance
- Appendix C: Alternate Wired Setup
- 22_BCover
ENGLISH - 43
APPENDIX C: ALTERNATE WIRED SETUP
Unable to pair the Acoustimass
®
wireless
bass module with the console
If you are having issues wirelessly connecting your bass module to your console, you
can also connect it using a 3.5 mm stereo cable (not provided).
Note: If you do not have a 3.5 mm stereo cable, contact your authorized Bose® dealer
or Bose customer service.
To install the 3.5 mm stereo cable:
1. On your remote control, press SETUP.
2. Select Speaker Management.
3. Follow the on-screen instructions until “The following steps will show you how to set
up your bass module” message displays.
4. Press
, then follow the on-screen instructions to finish setup.
Unable to pair the wireless receivers with
the console (rear speakers)
If you are unable to pair your rear speakers to the console, you can also connect them
directly to the system using a custom speaker cable (not provided). Use this method
only if you are having issues wirelessly connecting your rear speakers to your console.
Note: To receive the speaker cable, contact your authorized Bose® dealer or Bose
customer service.
To install the speaker cable:
1. On your remote control, press SETUP.
2. Select Speaker Management.
3. Follow the on-screen instructions until “The following steps will show you how to set
up your rear speakers” message displays.
4. Press
, then follow the on-screen instructions to finish setup.
CAUTION: Do not use any unauthorized wiring to connect the speakers to your Bose
system. Using unauthorized wires may damage your Bose system and its
components.