User's Manual
Table Of Contents
- 00_Cover
- 01_AM799905_0020_ENG_print
- Getting Started
- Setting Up the System
- Using the Remote Control
- SoundTouch® App Setup
- Existing SoundTouch® Users
- Preset Personalization
- Bluetooth Technology
- Choosing your pairing method
- Connect your mobile device
- Pair a device with NFC
- Control your connected mobile device from the remote control
- Connect using the Bluetooth feature on your mobile device
- Connect using your remote control
- Disconnect a mobile device
- Pair another mobile device
- Reconnect a device
- Clear the system's Bluetooth pairing list
- Advanced Features
- Getting System Information
- Care and Maintenance
- Troubleshooting
- Appendix A: Installation Reference
- Front console panel
- Back console panel
- Connecting an OmniJewel™ base
- Installing the front speakers
- Connecting the front speakers to the console
- Attaching the rubber feet to your center speaker
- Connecting the center speaker to the console
- Installing the rear speakers
- Identifying switch settings on wireless receivers
- Connecting the rear speakers
- Connecting the rear speakers to power
- Mounting your speakers
- Appendix B: System Maintenance
- Appendix C: Alternate Wired Setup
- 22_BCover
38 - ENGLISH
APPENDIX A: INSTALLATION REFERENCE
Connecting the center speaker to
the console
1. Remove the center speaker cable from box .
2. Place the center speaker according to “Placement guidelines” on page 12.
3. Insert the center speaker cable into the back of your center speaker.
4. Insert the molded plug of the six-pin cable into the six-pin FRONT SPEAKERS
connector on the back of your console.