Owner's Manual
Table Of Contents
- Owners Manual
- Table of Contents
- Getting Started
- Setting Up the System
- Using the Remote Control
- Setting Up SoundTouch
- Using the SoundTouch App
- Personalizing Your Presets
- Bluetooth Technology
- Advanced Features
- Getting System Information
- Care and Maintenance
- Troubleshooting
- Appendix A: installation reference
- Front console panel
- Back console panel
- Connecting an OmniJewel base
- Installing the front speakers
- Connecting the front speakers to the console
- Attaching the rubber feet to your center speaker
- Connecting the center speaker to the console
- Installing the rear speakers
- Identifying switch settings on wireless receivers
- Connecting the rear speakers
- Connecting the rear speakers to power
- Making a wired connection to the rear speakers
- Mounting your speakers
- Appendix B: System Maintenance
ENGLISH - 37
Connecting the front speakers to
the console
1. Place your speakers according to the “Placement guidelines” on page 11.
2. Connect and attach the OmniJewel™ bases to the OmniJewel™ speakers
(see page 35).
3. Insert the molded plug of the four-pin cable into the four-pin FRONT SPEAKERS
connector on the back of your console.
Attaching the rubber feet to your
center speaker
1. Remove the rubber feet from box .
2. Place the center speaker upside down on a soft, protected surface.
3. Remove the protective film from the feet.
4. Attach the rubber feet to the bottom of the center speaker at both ends.
APPENDIX A: INSTALLATION REFERENCE