User's Manual
Table Of Contents
- Getting Started
- Setting Up the System
- Using the Remote Control
- SoundTouch® App Setup
- Existing SoundTouch® Users
- Preset Personalization
- Bluetooth Technology
- Choosing your pairing method
- Connect your mobile device
- Pair a device with NFC
- Control your connected mobile device from the remote control
- Connect using the Bluetooth feature on your mobile device
- Connect using your remote control
- Disconnect a mobile device
- Pair another mobile device
- Reconnect a device
- Clear the system's Bluetooth pairing list
- Advanced Features
- Getting System Information
- Care and Maintenance
- Troubleshooting
- Appendix A: Installation Reference
- Front console panel
- Back console panel
- Connecting an AC-2 adapter
- Installing the front speakers
- Connecting the front speakers to the console
- Installing the rear speakers
- Identifying switch settings on wireless receivers
- Connecting the rear speakers
- Connecting the rear speakers to power
- Mounting your speakers
- Appendix B: System Maintenance
- Appendix C: Alternate Wired Setup
ENGLISH - 39
Installing the rear speakers
UNIFY® setup guides you through the initial installation of your rear speakers during the
“Wireless speakers” step (see page 16).
If you are moving your system but have already completed setup, refer to the following
instructions in order to reassemble the rear portion of your home entertainment system.
Note: If you are unable to pair your rear speakers to the console, you can also connect
them directly to the system using a custom speaker cable (not provided).
For further instruction, see page 43.
What you need:
From box :
Jewel Cube® speakers (2) Rear speaker cables (2) AC-2 adapters (2)
From box : From box : From box :
Wireless receivers (2) Power cords (2) Screwdriver (1)
APPENDIX A: INSTALLATION REFERENCE