User's Manual
Table Of Contents
- Getting Started
- Setting Up the System
- Using the Remote Control
- SoundTouch® App Setup
- Existing SoundTouch® Users
- Preset Personalization
- Bluetooth Technology
- Choosing your pairing method
- Connect your mobile device
- Pair a device with NFC
- Control your connected mobile device from the remote control
- Connect using the Bluetooth feature on your mobile device
- Connect using your remote control
- Disconnect a mobile device
- Pair another mobile device
- Reconnect a device
- Clear the system's Bluetooth pairing list
- Advanced Features
- Getting System Information
- Care and Maintenance
- Troubleshooting
- Appendix A: Installation Reference
- Front console panel
- Back console panel
- Connecting an AC-2 adapter
- Installing the front speakers
- Connecting the front speakers to the console
- Installing the rear speakers
- Identifying switch settings on wireless receivers
- Connecting the rear speakers
- Connecting the rear speakers to power
- Mounting your speakers
- Appendix B: System Maintenance
- Appendix C: Alternate Wired Setup
ENGLISH - 29
CARE AND MAINTENANCE
Cleaning
Do not allow liquids to spill onto the system or into any openings.
• Clean the exterior of the system with the provided cleaning cloth or another soft,
dry cloth.
• Do not use any sprays near the system.
• Do not use any solvents, chemicals or cleaning solutions containing alcohol, ammonia
or abrasives.
• Do not allow objects to drop into any openings.
Customer service
For additional help using the system:
• Visit global.Bose.com/Support/LS600
• Contact Bose® customer service.
Limited warranty
The system is covered by a limited warranty. Visit our website at
global.Bose.com/warranty for details of the limited warranty.
To register your product, visit global.Bose.com/register for instructions.
Failure to register will not aect your limited warranty rights.
Technical information
U.S.A./Canada/International:
• Console: 10VDC 3.3A, 44VDC 1.25A
• Wireless receivers: 100–240V 50/60 Hz, 30W
• Acoustimass® wireless bass module: 100–240V 50/60 Hz, 180W
SERVICE connector
The SERVICE connector is for service use only. Do not insert any cables into this
connector.